<?xml version="1.0" encoding="UTF-8"?>
<SBE_InstrumentConfiguration SB_ConfigCTD_FileVersion="7.21.0.5" >
  <Instrument Type="5" >
    <Name>SBE 25 Sealogger CTD</Name>
    <!-- Firmware version: 0 = version 2.0 or later, 1 = older than version 2.0 -->
    <FirmwareVersion>0</FirmwareVersion>
    <!-- Data output rate: -->
    <!--     0 = 1 scan/sec -->
    <!--     1 = 2 scan/sec -->
    <!--     2 = 4 scan/sec -->
    <!--     3 = 8 scan/sec -->
    <ExternalVoltageChannels>7</ExternalVoltageChannels>
    <RealTimeDataOutputRate>3</RealTimeDataOutputRate>
    <NmeaPositionDataAdded>1</NmeaPositionDataAdded>
    <NmeaDepthDataAdded>1</NmeaDepthDataAdded>
    <NmeaTimeAdded>1</NmeaTimeAdded>
    <NmeaDeviceConnectedToPC>1</NmeaDeviceConnectedToPC>
    <SurfaceParVoltageAdded>0</SurfaceParVoltageAdded>
    <ScanTimeAdded>0</ScanTimeAdded>
    <SensorArray Size="10" >
      <Sensor index="0" SensorID="55" >
        <TemperatureSensor SensorID="55" >
          <SerialNumber>2804</SerialNumber>
          <CalibrationDate>19-Apr-11</CalibrationDate>
          <UseG_J>1</UseG_J>
          <A>0.00000000e+000</A>
          <B>0.00000000e+000</B>
          <C>0.00000000e+000</C>
          <D>0.00000000e+000</D>
          <F0_Old>0.000</F0_Old>
          <G>4.30374879e-003</G>
          <H>6.39035430e-004</H>
          <I>2.18798719e-005</I>
          <J>2.01979309e-006</J>
          <F0>1000.000</F0>
          <Slope>1.00000000</Slope>
          <Offset>0.0000</Offset>
        </TemperatureSensor>
      </Sensor>
      <Sensor index="1" SensorID="3" >
        <ConductivitySensor SensorID="3" >
          <SerialNumber>042355</SerialNumber>
          <CalibrationDate>06-Apr-11</CalibrationDate>
          <UseG_J>1</UseG_J>
          <!-- Cell const and series R are applicable only for wide range sensors. -->
          <SeriesR>0.0000</SeriesR>
          <CellConst>2000.0000</CellConst>
          <ConductivityType>0</ConductivityType>
          <Coefficients equation="0" >
            <A>0.00000000e+000</A>
            <B>0.00000000e+000</B>
            <C>0.00000000e+000</C>
            <D>0.00000000e+000</D>
            <M>0.0</M>
            <CPcor>-9.57000000e-008</CPcor>
          </Coefficients>
          <Coefficients equation="1" >
            <G>-1.06458576e+001</G>
            <H>1.56690363e+000</H>
            <I>9.87012178e-004</I>
            <J>2.46977826e-005</J>
            <CPcor>-9.57000000e-008</CPcor>
            <CTcor>3.2500e-006</CTcor>
            <!-- WBOTC not applicable unless ConductivityType = 1. -->
            <WBOTC>0.00000000e+000</WBOTC>
          </Coefficients>
          <Slope>1.00000000</Slope>
          <Offset>0.00000</Offset>
        </ConductivitySensor>
      </Sensor>
      <Sensor index="2" SensorID="49" >
        <PressureSensor SensorID="49" >
          <SerialNumber>0403</SerialNumber>
          <CalibrationDate>25-May-11</CalibrationDate>
          <A0>1.002050e+002</A0>
          <A1>-2.763913e-002</A1>
          <A2>-1.292638e-008</A2>
          <Offset>0.00000</Offset>
        </PressureSensor>
      </Sensor>
      <Sensor index="3" SensorID="38" >
        <OxygenSensor SensorID="38" >
          <SerialNumber>0146</SerialNumber>
          <CalibrationDate>04-May-11p</CalibrationDate>
          <Use2007Equation>1</Use2007Equation>
          <CalibrationCoefficients equation="0" >
            <!-- Coefficients for Owens-Millard equation. -->
            <Boc>0.0000</Boc>
            <Soc>0.0000e+000</Soc>
            <offset>0.0000</offset>
            <Pcor>0.00e+000</Pcor>
            <Tcor>0.0000</Tcor>
            <Tau>0.0</Tau>
          </CalibrationCoefficients>
          <CalibrationCoefficients equation="1" >
            <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
            <Soc>4.7730e-001</Soc>
            <offset>-0.5072</offset>
            <A>-2.0040e-003</A>
            <B> 5.6465e-005</B>
            <C>-9.0359e-007</C>
            <D0> 2.5826e+000</D0>
            <D1> 1.92634e-004</D1>
            <D2>-4.64803e-002</D2>
            <E> 3.6000e-002</E>
            <Tau20> 1.2800</Tau20>
            <H1>-3.3000e-002</H1>
            <H2> 5.0000e+003</H2>
            <H3> 1.4500e+003</H3>
          </CalibrationCoefficients>
        </OxygenSensor>
      </Sensor>
      <Sensor index="4" SensorID="27" >
        <NotInUse SensorID="27" >
          <SerialNumber></SerialNumber>
          <CalibrationDate></CalibrationDate>
          <OutputType>2</OutputType>
          <Free>1</Free>
        </NotInUse>
      </Sensor>
      <Sensor index="5" SensorID="27" >
        <NotInUse SensorID="27" >
          <SerialNumber></SerialNumber>
          <CalibrationDate></CalibrationDate>
          <OutputType>2</OutputType>
          <Free>1</Free>
        </NotInUse>
      </Sensor>
      <Sensor index="6" SensorID="27" >
        <NotInUse SensorID="27" >
          <SerialNumber></SerialNumber>
          <CalibrationDate></CalibrationDate>
          <OutputType>2</OutputType>
          <Free>1</Free>
        </NotInUse>
      </Sensor>
      <Sensor index="7" SensorID="61" >
        <UserPolynomialSensor SensorID="61" >
          <SerialNumber>219</SerialNumber>
          <CalibrationDate>18 Oct 2011</CalibrationDate>
          <SensorName>ISUS</SensorName>
          <A0>-8.47370000</A0>
          <A1>27.35626000</A1>
          <A2>0.00000000</A2>
          <A3>0.00000000</A3>
        </UserPolynomialSensor>
      </Sensor>
      <Sensor index="8" SensorID="61" >
        <UserPolynomialSensor SensorID="61" >
          <SerialNumber>219</SerialNumber>
          <CalibrationDate>15-Jan-11</CalibrationDate>
          <SensorName>ISUS2</SensorName>
          <A0>-5.51984800</A0>
          <A1>14.19187100</A1>
          <A2>0.00000000</A2>
          <A3>0.00000000</A3>
        </UserPolynomialSensor>
      </Sensor>
      <Sensor index="9" SensorID="42" >
        <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
          <SerialNumber>20106</SerialNumber>
          <CalibrationDate>05-May-11</CalibrationDate>
          <M>-0.74890000</M>
          <B>-3.43410000</B>
          <CalibrationConstant>0.32500000</CalibrationConstant>
          <Multiplier>1.00000000</Multiplier>
          <Offset>0.00000000</Offset>
        </PAR_BiosphericalLicorChelseaSensor>
      </Sensor>
    </SensorArray>
  </Instrument>
</SBE_InstrumentConfiguration>
