2008/07/29 23:57:00 INIT: ------- Initiating Cast Number 32 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.43 ---------- 2008/07/29 23:57:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/29 23:57:51 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/29 23:57:51 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/29 23:57:52 Waterline: Setting motor to lower and reseting click counter. 2008/07/29 23:58:03 Waterline: stopped at Sonde Depth: 0.001 Click Count: 64/ 60 Conductivity: 45.13 Current: 0.729 Waterline: Motor Off: 64 clicks/60, SndDpth:0.001m, buffer: 151, Cond:45.13mS/cm, Current: 0.73 amps. 2008/07/29 23:58:04 Waterline: Initial Sonde Depth 0.001m. Conductivity: 45.13mS/cm. Waterline: Launch count is 64 clicks down from home position. 2008/07/29 23:58:04 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/29 23:58:08 Waterline: Attempting to collect 60 depth samples. 2008/07/29 23:59:08 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 249.0 Setting working depth from surface to: 243.0 cm. 2008/07/29 23:59:10 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 00:00:00 Beginning Cast Number 32 2008/07/30 00:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 00:00:01 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 00:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 00:00:52 Cast: Motor Off: 281 clicks/302, SndDpth:1.700m, buffer: 400, Cond:99.99mS/cm, Current: 0.75 amps. 2008/07/30 00:01:14 Cast: Reached the bottom of cast 32. After 281 clicks, depth at bottom is 199.2 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:46.87 mS/cm. 2008/07/30 00:01:15 Retrieving sonde 421 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 00:01:15 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 00:02:16 Retrieve: (WL) Motor Off: 326 clicks/421, SndDpth:0.049m, buffer: 74, Cond:42.72mS/cm, Current: 1.00 amps. 2008/07/30 00:02:21 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 00:02:24 Docking: Sonde at surface after 0 of 281 expected clicks. 2008/07/30 00:02:26 Docking: Raising sonde 64 clicks from waterline to home position. 2008/07/30 00:02:26 Docking: Setting motor to raise and reseting click counter. 2008/07/30 00:02:27 Docking: Motor Off: 330 clicks/64, SndDpth:0.003m, buffer: 222, Cond:0.74mS/cm, Current: 0.94 amps. 2008/07/30 00:02:28 Docking: Home position after 330 more clicks. Max current was 1.575 A. 2008/07/30 00:02:32 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 00:02:48 Stored 664 WIND samples to memory. Velocity: 3.296m/s (6.4 knots), Direction:218.9 Compass:167.3 North: -2.565 East: -2.070 2008/07/30 00:02:49 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 00:27:00 INIT: ------- Initiating Cast Number 33 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 00:27:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 00:27:20 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 00:27:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 00:27:31 Waterline: stopped at Sonde Depth: 0.022 Click Count: 58/ 61 Conductivity: 44.61 Current: 0.748 Waterline: Motor Off: 58 clicks/61, SndDpth:0.022m, buffer: 148, Cond:44.61mS/cm, Current: 0.75 amps. 2008/07/30 00:27:31 Waterline: Initial Sonde Depth 0.022m. Conductivity: 44.61mS/cm. Waterline: Launch count is 58 clicks down from home position. 2008/07/30 00:27:32 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 00:27:36 Waterline: Attempting to collect 60 depth samples. 2008/07/30 00:28:36 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 249.0 249.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 00:28:38 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 00:30:00 Beginning Cast Number 33 2008/07/30 00:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 00:30:01 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 00:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 00:30:49 Cast: Motor Off: 267 clicks/297, SndDpth:1.675m, buffer: 370, Cond:99.99mS/cm, Current: 0.78 amps. 2008/07/30 00:31:19 Cast: Reached the bottom of cast 33. After 267 clicks, depth at bottom is 196.7 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:46.41 mS/cm. 2008/07/30 00:31:20 Retrieving sonde 400 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 00:31:20 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 00:32:20 Retrieve: (WL) Motor Off: 319 clicks/400, SndDpth:0.055m, buffer: 74, Cond:44.53mS/cm, Current: 0.99 amps. 2008/07/30 00:32:24 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 00:32:28 Docking: Sonde at surface after 0 of 267 expected clicks. 2008/07/30 00:32:30 Docking: Raising sonde 58 clicks from waterline to home position. 2008/07/30 00:32:30 Docking: Setting motor to raise and reseting click counter. 2008/07/30 00:32:31 Docking: Motor Off: 322 clicks/58, SndDpth:0.003m, buffer: 222, Cond:0.61mS/cm, Current: 0.93 amps. 2008/07/30 00:32:31 Docking: Home position after 322 more clicks. Max current was 1.277 A. 2008/07/30 00:32:35 Saved 4068 of 4068 bytes to file 20080730.dat. 2008/07/30 00:32:51 Stored 670 WIND samples to memory. Velocity: 3.231m/s (6.3 knots), Direction:212.7 Compass:175.0 North: -2.720 East: -1.744 2008/07/30 00:32:52 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 00:57:00 INIT: ------- Initiating Cast Number 34 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.43 ---------- 2008/07/30 00:57:39 INIT: Calibrated sonde depth to 0.000m from -0.005m with Conductivity of 0.25 mS/cm. 2008/07/30 00:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 00:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 00:58:12 Waterline: stopped at Sonde Depth: 0.012 Click Count: 53/ 56 Conductivity: 44.60 Current: 0.660 Waterline: Motor Off: 53 clicks/56, SndDpth:0.012m, buffer: 148, Cond:44.60mS/cm, Current: 0.66 amps. 2008/07/30 00:58:12 Waterline: Initial Sonde Depth 0.012m. Conductivity: 44.60mS/cm. Waterline: Launch count is 53 clicks down from home position. 2008/07/30 00:58:12 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 00:58:17 Waterline: Attempting to collect 60 depth samples. 2008/07/30 00:59:17 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 240.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 00:59:19 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 01:00:00 Beginning Cast Number 34 2008/07/30 01:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 01:00:00 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 01:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 01:00:48 Cast: Motor Off: 264 clicks/291, SndDpth:1.640m, buffer: 370, Cond:99.99mS/cm, Current: 0.74 amps. 2008/07/30 01:01:07 Cast: Reached the bottom of cast 34. After 264 clicks, depth at bottom is 193.7 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:45.96 mS/cm. 2008/07/30 01:01:08 Retrieving sonde 396 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 01:01:08 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 01:02:08 Retrieve: (WL) Motor Off: 315 clicks/396, SndDpth:0.048m, buffer: 74, Cond:42.83mS/cm, Current: 0.99 amps. 2008/07/30 01:02:12 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 01:02:15 Docking: Sonde at surface after 0 of 264 expected clicks. 2008/07/30 01:02:18 Docking: Raising sonde 53 clicks from waterline to home position. 2008/07/30 01:02:18 Docking: Setting motor to raise and reseting click counter. 2008/07/30 01:02:19 Docking: Motor Off: 318 clicks/53, SndDpth:0.000m, buffer: 222, Cond:0.74mS/cm, Current: 0.95 amps. 2008/07/30 01:02:19 Docking: Home position after 318 more clicks. Max current was 1.475 A. 2008/07/30 01:02:23 Saved 4038 of 4038 bytes to file 20080730.dat. 2008/07/30 01:02:39 Stored 646 WIND samples to memory. Velocity: 3.425m/s (6.6 knots), Direction:215.5 Compass:176.8 North: -2.788 East: -1.989 2008/07/30 01:02:39 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 01:27:00 INIT: ------- Initiating Cast Number 35 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 01:27:39 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.28 mS/cm. 2008/07/30 01:28:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 01:28:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 01:28:13 Waterline: stopped at Sonde Depth: 0.024 Click Count: 58/ 56 Conductivity: 44.11 Current: 0.727 Waterline: Motor Off: 58 clicks/56, SndDpth:0.024m, buffer: 148, Cond:44.11mS/cm, Current: 0.73 amps. 2008/07/30 01:28:13 Waterline: Initial Sonde Depth 0.024m. Conductivity: 44.11mS/cm. Waterline: Launch count is 58 clicks down from home position. 2008/07/30 01:28:13 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 01:28:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 01:29:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 01:29:19 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 01:30:00 Beginning Cast Number 35 2008/07/30 01:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 01:30:00 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 01:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 01:30:48 Cast: Motor Off: 259 clicks/286, SndDpth:1.624m, buffer: 370, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 01:31:07 Cast: Reached the bottom of cast 35. After 259 clicks, depth at bottom is 192.1 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:45.95 mS/cm. 2008/07/30 01:31:08 Retrieving sonde 388 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 01:31:08 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 01:32:07 Retrieve: (WL) Motor Off: 310 clicks/388, SndDpth:0.059m, buffer: 74, Cond:44.13mS/cm, Current: 0.93 amps. 2008/07/30 01:32:11 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 01:32:14 Docking: Sonde at surface after 0 of 259 expected clicks. 2008/07/30 01:32:16 Docking: Raising sonde 58 clicks from waterline to home position. 2008/07/30 01:32:17 Docking: Setting motor to raise and reseting click counter. 2008/07/30 01:32:18 Docking: Motor Off: 314 clicks/58, SndDpth:0.006m, buffer: 222, Cond:0.77mS/cm, Current: 0.93 amps. 2008/07/30 01:32:18 Docking: Home position after 314 more clicks. Max current was 1.590 A. 2008/07/30 01:32:22 Saved 3994 of 3994 bytes to file 20080730.dat. 2008/07/30 01:32:37 Stored 644 WIND samples to memory. Velocity: 3.628m/s (7.0 knots), Direction:219.5 Compass:178.1 North: -2.800 East: -2.307 2008/07/30 01:32:38 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 01:32:38 Cast number 35. Time to re-home sonde then tune motor idle current. 2008/07/30 01:32:38 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 01:32:40 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:0.006m, buffer: 0, Cond:0.77mS/cm, Current: 0.64 amps. 2008/07/30 01:32:41 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 01:32:46 Re-Home: HIGH current error of 1.598 amps (1.400 A) on click 23(state 0)! 2008/07/30 01:32:46 Re-Home: Motor Off: 23 clicks/1000, SndDpth:0.006m, buffer: 0, Cond:0.77mS/cm, Current: 1.60 amps. 2008/07/30 01:32:46 Re-Home: Raised 23 clicks. Variance of 16 clicks. 2008/07/30 01:32:47 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 01:32:48 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:0.006m, buffer: 0, Cond:0.77mS/cm, Current: 0.67 amps. 2008/07/30 01:32:48 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 01:32:48 Motor idle current changed from 208 to 208. 2008/07/30 01:57:00 INIT: ------- Initiating Cast Number 36 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.43 ---------- 2008/07/30 01:57:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 01:57:20 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 01:57:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 01:57:32 Waterline: stopped at Sonde Depth: 0.002 Click Count: 63/ 60 Conductivity: 44.21 Current: 0.722 Waterline: Motor Off: 63 clicks/60, SndDpth:0.002m, buffer: 148, Cond:44.21mS/cm, Current: 0.72 amps. 2008/07/30 01:57:32 Waterline: Initial Sonde Depth 0.002m. Conductivity: 44.21mS/cm. Waterline: Launch count is 63 clicks down from home position. 2008/07/30 01:57:32 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 01:57:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 01:58:37 Success collecting 60 depth samples. 60 Sorted Depth Values: 228.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 01:58:39 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 02:00:00 Beginning Cast Number 36 2008/07/30 02:00:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 02:00:01 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 02:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 02:00:50 Cast: Motor Off: 268 clicks/286, SndDpth:1.624m, buffer: 370, Cond:99.99mS/cm, Current: 0.77 amps. 2008/07/30 02:01:20 Cast: Reached the bottom of cast 36. After 268 clicks, depth at bottom is 192.2 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:46.23 mS/cm. 2008/07/30 02:01:20 Retrieving sonde 402 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 02:01:21 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 02:02:16 Retrieve: (WL) Motor Off: 292 clicks/402, SndDpth:0.052m, buffer: 76, Cond:44.05mS/cm, Current: 0.95 amps. 2008/07/30 02:02:20 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 02:02:26 Retrieve: (WL) Motor Off: 323 clicks/402, SndDpth:0.003m, buffer: 142, Cond:1.22mS/cm, Current: 0.94 amps. 2008/07/30 02:02:30 Docking: Sonde at surface after 323 of 268 expected clicks. 2008/07/30 02:02:32 Docking: Raising sonde 63 clicks from waterline to home position. 2008/07/30 02:02:33 Docking: Setting motor to raise and reseting click counter. 2008/07/30 02:02:35 Docking: HIGH current error of 1.414 amps (1.400 A) on click 10(state 3)! 2008/07/30 02:02:35 Docking: Motor Off: 10 clicks/63, SndDpth:0.000m, buffer: 220, Cond:0.75mS/cm, Current: 1.41 amps. 2008/07/30 02:02:37 Docking: Motor Off: 10 clicks/63, SndDpth:0.000m, buffer: 115, Cond:0.73mS/cm, Current: 1.41 amps. 2008/07/30 02:02:37 Docking: Home position after 10 more clicks. Max current was 1.557 A. 2008/07/30 02:02:41 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 02:02:58 Stored 683 WIND samples to memory. Velocity: 3.547m/s (6.9 knots), Direction:220.5 Compass:176.1 North: -2.695 East: -2.306 2008/07/30 02:02:59 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 02:06:32 Watch Dog Will reboot system if ymodem send of 20080729.WND takes more than 20 minutes. 2008/07/30 02:07:05 Watch Dog Will reboot system if ymodem send of 20080729.DAT takes more than 20 minutes. 2008/07/30 02:15:26 Watch Dog Will reboot system if ymodem send of 20080729.LOG takes more than 20 minutes. 2008/07/30 02:27:00 INIT: ------- Initiating Cast Number 37 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 02:27:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 02:27:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 02:27:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 02:27:30 Waterline: stopped at Sonde Depth: 0.000 Click Count: 62/ 59 Conductivity: 44.36 Current: 0.748 Waterline: Motor Off: 62 clicks/59, SndDpth:0.000m, buffer: 148, Cond:44.36mS/cm, Current: 0.75 amps. 2008/07/30 02:27:30 Waterline: Initial Sonde Depth 0.000m. Conductivity: 44.36mS/cm. Waterline: Launch count is 62 clicks down from home position. 2008/07/30 02:27:31 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 02:27:35 Waterline: Attempting to collect 60 depth samples. 2008/07/30 02:28:35 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 240.0 243.0 243.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 02:28:37 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 02:30:00 Beginning Cast Number 37 2008/07/30 02:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 02:30:01 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 02:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 02:30:50 Cast: Motor Off: 272 clicks/291, SndDpth:1.628m, buffer: 370, Cond:99.99mS/cm, Current: 0.75 amps. 2008/07/30 02:31:21 Cast: Reached the bottom of cast 37. After 272 clicks, depth at bottom is 192.8 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:46.39 mS/cm. 2008/07/30 02:31:21 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 02:31:21 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 02:32:20 Retrieve: (WL) Motor Off: 309 clicks/408, SndDpth:0.056m, buffer: 75, Cond:44.00mS/cm, Current: 0.99 amps. 2008/07/30 02:32:24 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 02:32:28 Docking: Sonde at surface after 0 of 272 expected clicks. 2008/07/30 02:32:30 Docking: Raising sonde 62 clicks from waterline to home position. 2008/07/30 02:32:30 Docking: Setting motor to raise and reseting click counter. 2008/07/30 02:32:31 Docking: Motor Off: 312 clicks/62, SndDpth:0.003m, buffer: 222, Cond:0.65mS/cm, Current: 0.91 amps. 2008/07/30 02:32:31 Docking: Home position after 312 more clicks. Max current was 1.498 A. 2008/07/30 02:32:36 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 02:32:51 Stored 670 WIND samples to memory. Velocity: 3.700m/s (7.2 knots), Direction:228.9 Compass:161.5 North: -2.434 East: -2.786 2008/07/30 02:32:52 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 02:57:00 INIT: ------- Initiating Cast Number 38 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.43 ---------- 2008/07/30 02:57:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/30 02:58:12 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.25 mS/cm. 2008/07/30 02:58:35 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 02:58:35 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 02:58:39 Waterline: stopped at Sonde Depth: 1.651 Click Count: 21/ 55 Conductivity: 0.27 Current: 0.681 Waterline: Motor Off: 21 clicks/55, SndDpth:1.651m, buffer: 111, Cond:0.27mS/cm, Current: 0.68 amps. 2008/07/30 02:58:39 Waterline: Initial Sonde Depth 1.651m. Conductivity: 0.27mS/cm. Waterline: Launch count is 55 clicks down from home position. 2008/07/30 02:58:40 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 02:58:44 Waterline: Attempting to collect 60 depth samples. 2008/07/30 02:59:44 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 240.0 243.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 02:59:46 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 03:00:20 Beginning Cast Number 38 2008/07/30 03:00:20 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 03:00:20 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 03:00:20 Cast: Setting motor to lower and reseting click counter. 2008/07/30 03:00:24 Cast: Reached the bottom of cast 38. After 0 clicks, depth at bottom is 0.1 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:43.81 mS/cm. 2008/07/30 03:00:24 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 03:00:25 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 03:00:31 Retrieve: Motor Off: 32 clicks/408, SndDpth:-0.002m, buffer: 104, Cond:1.59mS/cm, Current: 0.94 amps. 2008/07/30 03:00:35 Docking: Sonde at surface after 32 of 272 expected clicks. 2008/07/30 03:00:37 Docking: Raising sonde 55 clicks from waterline to home position. 2008/07/30 03:00:37 Docking: Setting motor to raise and reseting click counter. 2008/07/30 03:00:39 Docking: HIGH current error of 1.884 amps (1.400 A) on click 10(state 0)! 2008/07/30 03:00:39 Docking: Motor Off: 10 clicks/55, SndDpth:-0.002m, buffer: 287, Cond:0.85mS/cm, Current: 1.88 amps. 2008/07/30 03:00:40 Docking: Motor Off: 10 clicks/55, SndDpth:-0.002m, buffer: 296, Cond:0.81mS/cm, Current: 1.88 amps. 2008/07/30 03:00:40 Docking: Home position after 10 more clicks. Max current was 1.373 A. 2008/07/30 03:00:44 Saved 294 of 294 bytes to file 20080730.dat. 2008/07/30 03:00:48 Stored 435 WIND samples to memory. Velocity: 4.331m/s (8.4 knots), Direction:238.4 Compass:161.8 North: -2.268 East: -3.689 2008/07/30 03:00:49 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 03:27:00 INIT: ------- Initiating Cast Number 39 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 03:27:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 03:27:21 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 03:27:21 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 03:27:32 Waterline: stopped at Sonde Depth: 0.002 Click Count: 63/ 60 Conductivity: 44.01 Current: 0.729 Waterline: Motor Off: 63 clicks/60, SndDpth:0.002m, buffer: 148, Cond:44.01mS/cm, Current: 0.73 amps. 2008/07/30 03:27:33 Waterline: Initial Sonde Depth 0.002m. Conductivity: 44.01mS/cm. Waterline: Launch count is 63 clicks down from home position. 2008/07/30 03:27:33 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 03:27:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 03:28:37 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 240.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 03:28:39 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 03:30:01 Beginning Cast Number 39 2008/07/30 03:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 03:30:01 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 03:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 03:30:50 Cast: Motor Off: 272 clicks/291, SndDpth:1.636m, buffer: 370, Cond:99.99mS/cm, Current: 0.82 amps. 2008/07/30 03:31:20 Cast: Reached the bottom of cast 39. After 272 clicks, depth at bottom is 193.0 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:46.19 mS/cm. 2008/07/30 03:31:21 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 03:31:21 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 03:32:23 Retrieve: (WL) Motor Off: 322 clicks/408, SndDpth:0.033m, buffer: 82, Cond:1.34mS/cm, Current: 0.92 amps. 2008/07/30 03:32:27 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 03:32:30 Docking: Sonde at surface after 0 of 272 expected clicks. 2008/07/30 03:32:32 Docking: Raising sonde 63 clicks from waterline to home position. 2008/07/30 03:32:32 Docking: Setting motor to raise and reseting click counter. 2008/07/30 03:32:34 Docking: Motor Off: 327 clicks/63, SndDpth:0.003m, buffer: 232, Cond:0.69mS/cm, Current: 0.95 amps. 2008/07/30 03:32:34 Docking: Home position after 327 more clicks. Max current was 1.582 A. 2008/07/30 03:32:38 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 03:32:54 Stored 675 WIND samples to memory. Velocity: 3.191m/s (6.2 knots), Direction:234.2 Compass:163.5 North: -1.865 East: -2.590 2008/07/30 03:32:54 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 03:57:00 INIT: ------- Initiating Cast Number 40 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 03:57:19 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 03:57:19 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 03:57:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 03:57:31 Waterline: stopped at Sonde Depth: 0.008 Click Count: 62/ 59 Conductivity: 43.49 Current: 0.725 Waterline: Motor Off: 62 clicks/59, SndDpth:0.008m, buffer: 148, Cond:43.49mS/cm, Current: 0.73 amps. 2008/07/30 03:57:31 Waterline: Initial Sonde Depth 0.008m. Conductivity: 43.49mS/cm. Waterline: Launch count is 62 clicks down from home position. 2008/07/30 03:57:32 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 03:57:36 Waterline: Attempting to collect 60 depth samples. 2008/07/30 03:58:36 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 243.0 246.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 03:58:38 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 04:00:00 Beginning Cast Number 40 2008/07/30 04:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 04:00:01 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 04:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 04:00:49 Cast: Motor Off: 266 clicks/291, SndDpth:1.653m, buffer: 370, Cond:99.99mS/cm, Current: 0.78 amps. 2008/07/30 04:01:19 Cast: Reached the bottom of cast 40. After 266 clicks, depth at bottom is 194.2 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:46.55 mS/cm. 2008/07/30 04:01:20 Retrieving sonde 399 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 04:01:20 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 04:02:18 Retrieve: (WL) Motor Off: 302 clicks/399, SndDpth:0.055m, buffer: 74, Cond:43.55mS/cm, Current: 0.92 amps. 2008/07/30 04:02:22 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 04:02:26 Retrieve: (WL) Motor Off: 321 clicks/399, SndDpth:0.001m, buffer: 104, Cond:1.28mS/cm, Current: 0.90 amps. 2008/07/30 04:02:29 Docking: Sonde at surface after 321 of 266 expected clicks. 2008/07/30 04:02:31 Docking: Raising sonde 62 clicks from waterline to home position. 2008/07/30 04:02:31 Docking: Setting motor to raise and reseting click counter. 2008/07/30 04:02:35 Docking: HIGH current error of 1.477 amps (1.400 A) on click 15(state 3)! 2008/07/30 04:02:35 Docking: Motor Off: 15 clicks/62, SndDpth:-0.006m, buffer: 291, Cond:0.66mS/cm, Current: 1.48 amps. 2008/07/30 04:02:36 Docking: Motor Off: 15 clicks/62, SndDpth:-0.006m, buffer: 115, Cond:0.64mS/cm, Current: 1.48 amps. 2008/07/30 04:02:37 Docking: Home position after 15 more clicks. Max current was 1.587 A. 2008/07/30 04:02:41 Saved 4090 of 4090 bytes to file 20080730.dat. 2008/07/30 04:02:58 Stored 682 WIND samples to memory. Velocity: 3.279m/s (6.4 knots), Direction:242.5 Compass:177.5 North: -1.516 East: -2.908 2008/07/30 04:02:59 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 04:02:59 Cast number 40. Time to re-home sonde then tune motor idle current. 2008/07/30 04:02:59 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 04:03:00 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.006m, buffer: 0, Cond:0.64mS/cm, Current: 0.65 amps. 2008/07/30 04:03:02 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 04:03:03 Re-Home: HIGH current error of 1.529 amps (1.400 A) on click 5(state 1)! 2008/07/30 04:03:03 Re-Home: Motor Off: 5 clicks/1000, SndDpth:-0.006m, buffer: 0, Cond:0.64mS/cm, Current: 1.53 amps. 2008/07/30 04:03:03 Re-Home: Raised 5 clicks. Variance of -2 clicks. 2008/07/30 04:03:05 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 04:03:05 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.006m, buffer: 0, Cond:0.64mS/cm, Current: 0.61 amps. 2008/07/30 04:03:05 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 04:03:06 Motor idle current changed from 208 to 208. 2008/07/30 04:27:00 INIT: ------- Initiating Cast Number 41 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 04:27:39 INIT: Calibrated sonde depth to 0.000m from -0.007m with Conductivity of 0.28 mS/cm. 2008/07/30 04:28:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 04:28:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 04:28:14 Waterline: stopped at Sonde Depth: 0.001 Click Count: 63/ 60 Conductivity: 43.74 Current: 0.656 Waterline: Motor Off: 63 clicks/60, SndDpth:0.001m, buffer: 148, Cond:43.74mS/cm, Current: 0.66 amps. 2008/07/30 04:28:14 Waterline: Initial Sonde Depth 0.001m. Conductivity: 43.74mS/cm. Waterline: Launch count is 63 clicks down from home position. 2008/07/30 04:28:14 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 04:28:19 Waterline: Attempting to collect 60 depth samples. 2008/07/30 04:29:19 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 04:29:21 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 04:30:00 Beginning Cast Number 41 2008/07/30 04:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 04:30:00 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 04:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 04:30:50 Cast: Motor Off: 272 clicks/297, SndDpth:1.676m, buffer: 370, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 04:31:09 Cast: Reached the bottom of cast 41. After 272 clicks, depth at bottom is 193.8 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:47.07 mS/cm. 2008/07/30 04:31:10 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 04:31:10 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 04:32:08 Retrieve: (WL) Motor Off: 303 clicks/408, SndDpth:0.051m, buffer: 74, Cond:43.69mS/cm, Current: 0.99 amps. 2008/07/30 04:32:12 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 04:32:14 Retrieve: (WL) Motor Off: 311 clicks/408, SndDpth:0.012m, buffer: 76, Cond:43.63mS/cm, Current: 0.97 amps. 2008/07/30 04:32:18 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 04:32:21 Docking: Sonde at surface after 0 of 272 expected clicks. 2008/07/30 04:32:23 Docking: Raising sonde 63 clicks from waterline to home position. 2008/07/30 04:32:24 Docking: Setting motor to raise and reseting click counter. 2008/07/30 04:32:25 Docking: Motor Off: 314 clicks/63, SndDpth:0.003m, buffer: 222, Cond:0.77mS/cm, Current: 0.93 amps. 2008/07/30 04:32:25 Docking: Home position after 314 more clicks. Max current was 1.350 A. 2008/07/30 04:32:29 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 04:32:45 Stored 658 WIND samples to memory. Velocity: 3.161m/s (6.1 knots), Direction:233.3 Compass:180.7 North: -1.890 East: -2.534 2008/07/30 04:32:46 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 04:57:00 INIT: ------- Initiating Cast Number 42 on AVP1_SERDP . Bat at 12.6 Volts, Software Version: 1.43 ---------- 2008/07/30 04:57:39 INIT: Calibrated sonde depth to 0.000m from 0.004m with Conductivity of 0.28 mS/cm. 2008/07/30 04:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 04:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 04:58:11 Waterline: stopped at Sonde Depth: 0.022 Click Count: 50/ 60 Conductivity: 44.21 Current: 0.702 Waterline: Motor Off: 50 clicks/60, SndDpth:0.022m, buffer: 148, Cond:44.21mS/cm, Current: 0.70 amps. 2008/07/30 04:58:12 Waterline: Initial Sonde Depth 0.022m. Conductivity: 44.21mS/cm. Waterline: Launch count is 50 clicks down from home position. 2008/07/30 04:58:12 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 04:58:16 Waterline: Attempting to collect 60 depth samples. 2008/07/30 04:59:17 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 256.0 Setting working depth from surface to: 243.0 cm. 2008/07/30 04:59:19 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 05:00:00 Beginning Cast Number 42 2008/07/30 05:00:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 05:00:01 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 05:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 05:00:51 Cast: Motor Off: 272 clicks/302, SndDpth:1.709m, buffer: 370, Cond:99.99mS/cm, Current: 0.78 amps. 2008/07/30 05:01:11 Cast: Reached the bottom of cast 42. After 272 clicks, depth at bottom is 198.4 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:48.64 mS/cm. 2008/07/30 05:01:11 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 05:01:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 05:02:09 Retrieve: (WL) Motor Off: 300 clicks/408, SndDpth:0.057m, buffer: 74, Cond:44.03mS/cm, Current: 0.97 amps. 2008/07/30 05:02:13 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 05:02:19 Retrieve: (WL) Motor Off: 329 clicks/408, SndDpth:0.001m, buffer: 119, Cond:1.51mS/cm, Current: 1.02 amps. 2008/07/30 05:02:23 Docking: Sonde at surface after 329 of 272 expected clicks. 2008/07/30 05:02:25 Docking: Raising sonde 50 clicks from waterline to home position. 2008/07/30 05:02:26 Docking: Setting motor to raise and reseting click counter. 2008/07/30 05:02:28 Docking: HIGH current error of 1.408 amps (1.400 A) on click 12(state 1)! 2008/07/30 05:02:28 Docking: Motor Off: 12 clicks/50, SndDpth:-0.001m, buffer: 237, Cond:0.70mS/cm, Current: 1.41 amps. 2008/07/30 05:02:30 Docking: Motor Off: 12 clicks/50, SndDpth:-0.001m, buffer: 115, Cond:0.67mS/cm, Current: 1.41 amps. 2008/07/30 05:02:30 Docking: Home position after 12 more clicks. Max current was 1.587 A. 2008/07/30 05:02:35 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 05:02:52 Stored 671 WIND samples to memory. Velocity: 2.572m/s (5.0 knots), Direction:217.2 Compass:186.1 North: -2.048 East: -1.556 2008/07/30 05:02:53 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 05:27:00 INIT: ------- Initiating Cast Number 43 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 05:27:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/30 05:27:51 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 05:27:51 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 05:27:51 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 05:28:00 Waterline: stopped at Sonde Depth: 1.798 Click Count: 44/ 55 Conductivity: 0.93 Current: 0.644 Waterline: Motor Off: 44 clicks/55, SndDpth:1.798m, buffer: 148, Cond:0.93mS/cm, Current: 0.64 amps. 2008/07/30 05:28:00 Waterline: Initial Sonde Depth 1.798m. Conductivity: 0.93mS/cm. Waterline: Launch count is 44 clicks down from home position. 2008/07/30 05:28:00 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 05:28:05 Waterline: Attempting to collect 60 depth samples. 2008/07/30 05:29:05 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 259.0 Setting working depth from surface to: 243.0 cm. 2008/07/30 05:29:07 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 05:30:00 Beginning Cast Number 43 2008/07/30 05:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 05:30:00 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 05:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 05:30:09 Cast: Reached the bottom of cast 43. After 0 clicks, depth at bottom is 0.0 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:44.58 mS/cm. 2008/07/30 05:30:10 Retrieving sonde 408 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 05:30:10 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 05:30:16 Retrieve: Motor Off: 30 clicks/408, SndDpth:0.000m, buffer: 85, Cond:1.50mS/cm, Current: 0.95 amps. 2008/07/30 05:30:20 Docking: Sonde at surface after 30 of 272 expected clicks. 2008/07/30 05:30:22 Docking: Raising sonde 44 clicks from waterline to home position. 2008/07/30 05:30:22 Docking: Setting motor to raise and reseting click counter. 2008/07/30 05:30:25 Docking: HIGH current error of 1.705 amps (1.400 A) on click 15(state 0)! 2008/07/30 05:30:25 Docking: Motor Off: 15 clicks/44, SndDpth:-0.001m, buffer: 262, Cond:0.79mS/cm, Current: 1.71 amps. 2008/07/30 05:30:27 Docking: Motor Off: 15 clicks/44, SndDpth:-0.001m, buffer: 189, Cond:0.76mS/cm, Current: 1.71 amps. 2008/07/30 05:30:27 Docking: Home position after 15 more clicks. Max current was 1.514 A. 2008/07/30 05:30:31 Saved 294 of 294 bytes to file 20080730.dat. 2008/07/30 05:30:35 Stored 410 WIND samples to memory. Velocity: 3.273m/s (6.3 knots), Direction:229.8 Compass:183.5 North: -2.112 East: -2.500 2008/07/30 05:30:36 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 05:57:00 INIT: ------- Initiating Cast Number 44 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.43 ---------- 2008/07/30 05:57:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 05:57:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 05:57:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 05:57:30 Waterline: stopped at Sonde Depth: 0.000 Click Count: 62/ 59 Conductivity: 45.50 Current: 0.736 Waterline: Motor Off: 62 clicks/59, SndDpth:0.000m, buffer: 148, Cond:45.50mS/cm, Current: 0.74 amps. 2008/07/30 05:57:30 Waterline: Initial Sonde Depth 0.000m. Conductivity: 45.50mS/cm. Waterline: Launch count is 62 clicks down from home position. 2008/07/30 05:57:30 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 05:57:35 Waterline: Attempting to collect 60 depth samples. 2008/07/30 05:58:35 Success collecting 60 depth samples. 60 Sorted Depth Values: 228.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 Setting working depth from surface to: 243.0 cm. 2008/07/30 05:58:37 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 06:00:00 Beginning Cast Number 44 2008/07/30 06:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 06:00:01 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 06:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 06:00:52 Cast: Motor Off: 281 clicks/302, SndDpth:1.693m, buffer: 370, Cond:99.99mS/cm, Current: 0.72 amps. 2008/07/30 06:01:23 Cast: Reached the bottom of cast 44. After 281 clicks, depth at bottom is 198.0 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:48.29 mS/cm. 2008/07/30 06:01:23 Retrieving sonde 421 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 06:01:24 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 06:02:25 Retrieve: (WL) Motor Off: 322 clicks/421, SndDpth:0.049m, buffer: 74, Cond:13.80mS/cm, Current: 0.91 amps. 2008/07/30 06:02:29 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 06:02:32 Docking: Sonde at surface after 0 of 281 expected clicks. 2008/07/30 06:02:35 Docking: Raising sonde 62 clicks from waterline to home position. 2008/07/30 06:02:35 Docking: Setting motor to raise and reseting click counter. 2008/07/30 06:02:36 Docking: Motor Off: 325 clicks/62, SndDpth:0.002m, buffer: 222, Cond:0.78mS/cm, Current: 0.93 amps. 2008/07/30 06:02:36 Docking: Home position after 325 more clicks. Max current was 1.580 A. 2008/07/30 06:02:40 Saved 4290 of 4290 bytes to file 20080730.dat. 2008/07/30 06:02:56 Stored 679 WIND samples to memory. Velocity: 3.384m/s (6.6 knots), Direction:235.1 Compass:179.2 North: -1.938 East: -2.774 2008/07/30 06:02:56 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 06:27:00 INIT: ------- Initiating Cast Number 45 on AVP1_SERDP . Bat at 12.6 Volts, Software Version: 1.43 ---------- 2008/07/30 06:27:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 06:27:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 06:27:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 06:27:28 Waterline: stopped at Sonde Depth: 0.009 Click Count: 50/ 60 Conductivity: 45.67 Current: 0.683 Waterline: Motor Off: 50 clicks/60, SndDpth:0.009m, buffer: 148, Cond:45.67mS/cm, Current: 0.68 amps. 2008/07/30 06:27:28 Waterline: Initial Sonde Depth 0.009m. Conductivity: 45.67mS/cm. Waterline: Launch count is 50 clicks down from home position. 2008/07/30 06:27:28 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 06:27:33 Waterline: Attempting to collect 60 depth samples. 2008/07/30 06:28:33 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 256.0 Setting working depth from surface to: 243.0 cm. 2008/07/30 06:28:35 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 06:30:00 Beginning Cast Number 45 2008/07/30 06:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 06:30:00 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 06:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 06:30:50 Cast: Motor Off: 276 clicks/302, SndDpth:1.688m, buffer: 429, Cond:99.99mS/cm, Current: 0.75 amps. 2008/07/30 06:31:22 Cast: Reached the bottom of cast 45. After 276 clicks, depth at bottom is 199.3 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:49.59 mS/cm. 2008/07/30 06:31:22 Retrieving sonde 414 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 06:31:23 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 06:32:20 Retrieve: (WL) Motor Off: 304 clicks/414, SndDpth:0.031m, buffer: 74, Cond:45.30mS/cm, Current: 0.91 amps. 2008/07/30 06:32:25 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 06:32:30 Retrieve: (WL) Motor Off: 328 clicks/414, SndDpth:-0.001m, buffer: 104, Cond:1.82mS/cm, Current: 0.88 amps. 2008/07/30 06:32:34 Docking: Sonde at surface after 328 of 276 expected clicks. 2008/07/30 06:32:36 Docking: Raising sonde 50 clicks from waterline to home position. 2008/07/30 06:32:36 Docking: Setting motor to raise and reseting click counter. 2008/07/30 06:32:39 Docking: HIGH current error of 1.700 amps (1.400 A) on click 15(state 1)! 2008/07/30 06:32:40 Docking: Motor Off: 15 clicks/50, SndDpth:-0.002m, buffer: 279, Cond:0.86mS/cm, Current: 1.70 amps. 2008/07/30 06:32:41 Docking: Motor Off: 15 clicks/50, SndDpth:-0.002m, buffer: 115, Cond:0.83mS/cm, Current: 1.70 amps. 2008/07/30 06:32:41 Docking: Home position after 15 more clicks. Max current was 1.456 A. 2008/07/30 06:32:46 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 06:33:03 Stored 692 WIND samples to memory. Velocity: 3.337m/s (6.5 knots), Direction:243.5 Compass:175.2 North: -1.490 East: -2.986 2008/07/30 06:33:03 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 06:33:04 Cast number 45. Time to re-home sonde then tune motor idle current. 2008/07/30 06:33:04 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 06:33:05 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.002m, buffer: 0, Cond:0.83mS/cm, Current: 0.62 amps. 2008/07/30 06:33:06 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 06:33:08 Re-Home: HIGH current error of 2.148 amps (1.400 A) on click 5(state 0)! 2008/07/30 06:33:08 Re-Home: Motor Off: 5 clicks/1000, SndDpth:-0.002m, buffer: 0, Cond:0.83mS/cm, Current: 2.15 amps. 2008/07/30 06:33:08 Re-Home: Raised 5 clicks. Variance of -2 clicks. 2008/07/30 06:33:09 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 06:33:10 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.002m, buffer: 0, Cond:0.83mS/cm, Current: 0.60 amps. 2008/07/30 06:33:10 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 06:33:10 Motor idle current changed from 208 to 208. 2008/07/30 06:57:00 INIT: ------- Initiating Cast Number 46 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.43 ---------- 2008/07/30 06:57:38 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.30 mS/cm. 2008/07/30 06:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 06:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 06:58:13 Waterline: stopped at Sonde Depth: 0.001 Click Count: 60/ 57 Conductivity: 45.97 Current: 0.688 Waterline: Motor Off: 60 clicks/57, SndDpth:0.001m, buffer: 148, Cond:45.97mS/cm, Current: 0.69 amps. 2008/07/30 06:58:13 Waterline: Initial Sonde Depth 0.001m. Conductivity: 45.97mS/cm. Waterline: Launch count is 60 clicks down from home position. 2008/07/30 06:58:13 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 06:58:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 06:59:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 252.0 256.0 Setting working depth from surface to: 243.0 cm. 2008/07/30 06:59:20 Waterline: Working Depth is 243.0, Target Depth is 168.0 2008/07/30 07:00:00 Beginning Cast Number 46 2008/07/30 07:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 07:00:00 Cast: lowering to 168.0 cm, or 302 clicks. 2008/07/30 07:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 07:00:52 Cast: Motor Off: 293 clicks/302, SndDpth:1.693m, buffer: 518, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 07:01:14 Cast: Reached the bottom of cast 46. After 293 clicks, depth at bottom is 204.8 cm. Cast: Target was 302 clicks or a final depth of 168.0 cm. Cast: Conductivity is:49.48 mS/cm. 2008/07/30 07:01:15 Retrieving sonde 439 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 07:01:15 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 07:02:20 Retrieve: (WL) Motor Off: 352 clicks/439, SndDpth:0.030m, buffer: 222, Cond:1.28mS/cm, Current: 1.25 amps. 2008/07/30 07:02:25 Docking: Sonde at surface after 352 of 293 expected clicks. 2008/07/30 07:02:27 Docking: Raising sonde 60 clicks from waterline to home position. 2008/07/30 07:02:27 Docking: Setting motor to raise and reseting click counter. 2008/07/30 07:02:28 Docking: HIGH current error of 2.218 amps (1.600 A) on click 2(state 1)! 2008/07/30 07:02:28 Docking: Motor Off: 2 clicks/60, SndDpth:0.010m, buffer: 195, Cond:0.77mS/cm, Current: 2.22 amps. 2008/07/30 07:02:29 Docking: Motor Off: 2 clicks/60, SndDpth:0.008m, buffer: 115, Cond:0.72mS/cm, Current: 2.22 amps. 2008/07/30 07:02:30 Docking: Home position after 2 more clicks. Max current was 1.580 A. 2008/07/30 07:02:34 Saved 4438 of 4438 bytes to file 20080730.dat. 2008/07/30 07:02:50 Stored 667 WIND samples to memory. Velocity: 3.650m/s (7.1 knots), Direction:241.1 Compass:172.4 North: -1.763 East: -3.196 2008/07/30 07:02:50 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 07:27:00 INIT: ------- Initiating Cast Number 47 on AVP1_SERDP . Bat at 13.1 Volts, Software Version: 1.43 ---------- 2008/07/30 07:27:40 INIT: Calibrated sonde depth to 0.000m from 0.007m with Conductivity of 0.27 mS/cm. 2008/07/30 07:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 07:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 07:28:17 Waterline: stopped at Sonde Depth: 0.005 Click Count: 73/ 68 Conductivity: 45.76 Current: 0.688 Waterline: Motor Off: 73 clicks/68, SndDpth:0.005m, buffer: 222, Cond:45.76mS/cm, Current: 0.69 amps. 2008/07/30 07:28:17 Waterline: Initial Sonde Depth 0.005m. Conductivity: 45.76mS/cm. Waterline: Launch count is 73 clicks down from home position. 2008/07/30 07:28:18 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 07:28:22 Waterline: Attempting to collect 60 depth samples. 2008/07/30 07:29:22 Success collecting 60 depth samples. 60 Sorted Depth Values: 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 249.0 249.0 256.0 256.0 262.0 262.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 07:29:24 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 07:30:00 Beginning Cast Number 47 2008/07/30 07:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 07:30:01 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 07:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 07:30:53 Cast: Motor Off: 301 clicks/307, SndDpth:1.729m, buffer: 666, Cond:99.99mS/cm, Current: 0.84 amps. 2008/07/30 07:31:15 Cast: Reached the bottom of cast 47. After 301 clicks, depth at bottom is 215.4 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:49.79 mS/cm. 2008/07/30 07:31:16 Retrieving sonde 451 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 07:31:16 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 07:32:23 Retrieve: (WL) HIGH current error of 1.415 amps (1.400 A) on click 371(state 0)! 2008/07/30 07:32:23 Retrieve: (WL) Motor Off: 371 clicks/451, SndDpth:0.003m, buffer: 438, Cond:45.53mS/cm, Current: 1.42 amps. 2008/07/30 07:32:25 Retrieve: (WL) Motor Off: 371 clicks/451, SndDpth:0.001m, buffer: 300, Cond:27.62mS/cm, Current: 1.42 amps. 2008/07/30 07:32:30 Docking: Sonde at surface after 371 of 301 expected clicks. 2008/07/30 07:32:32 Docking: Raising sonde 73 clicks from waterline to home position. 2008/07/30 07:32:32 Docking: Setting motor to raise and reseting click counter. 2008/07/30 07:32:33 Docking: HIGH current error of 4.106 amps (1.400 A) on click 2(state 1)! 2008/07/30 07:32:33 Docking: Motor Off: 2 clicks/73, SndDpth:-0.006m, buffer: 260, Cond:0.68mS/cm, Current: 4.11 amps. 2008/07/30 07:32:34 Docking: Motor Off: 2 clicks/73, SndDpth:-0.006m, buffer: 145, Cond:0.64mS/cm, Current: 4.11 amps. 2008/07/30 07:32:35 Docking: Home position after 2 more clicks. Max current was 1.507 A. 2008/07/30 07:32:39 Saved 4512 of 4512 bytes to file 20080730.dat. 2008/07/30 07:32:56 Stored 680 WIND samples to memory. Velocity: 4.603m/s (8.9 knots), Direction:239.2 Compass:172.4 North: -2.357 East: -3.953 2008/07/30 07:32:57 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 07:57:00 INIT: ------- Initiating Cast Number 48 on AVP1_SERDP . Bat at 13.3 Volts, Software Version: 1.43 ---------- 2008/07/30 07:57:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/30 07:57:51 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 07:57:51 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 07:57:51 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 07:58:04 Waterline: stopped at Sonde Depth: 0.003 Click Count: 75/ 70 Conductivity: 46.04 Current: 0.706 Waterline: Motor Off: 75 clicks/70, SndDpth:0.003m, buffer: 296, Cond:46.04mS/cm, Current: 0.71 amps. 2008/07/30 07:58:04 Waterline: Initial Sonde Depth 0.003m. Conductivity: 46.04mS/cm. Waterline: Launch count is 75 clicks down from home position. 2008/07/30 07:58:05 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 07:58:09 Waterline: Attempting to collect 60 depth samples. 2008/07/30 07:59:09 Success collecting 60 depth samples. 60 Sorted Depth Values: 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 249.0 249.0 249.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 07:59:11 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 08:00:00 Beginning Cast Number 48 2008/07/30 08:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 08:00:00 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 08:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 08:00:52 Cast: Motor Off: 304 clicks/307, SndDpth:1.723m, buffer: 740, Cond:99.99mS/cm, Current: 0.77 amps. 2008/07/30 08:01:18 Cast: Reached the bottom of cast 48. After 304 clicks, depth at bottom is 216.1 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:49.10 mS/cm. 2008/07/30 08:01:19 Retrieving sonde 456 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 08:01:19 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 08:02:26 Retrieve: (WL) HIGH current error of 1.608 amps (1.600 A) on click 377(state 2)! 2008/07/30 08:02:26 Retrieve: (WL) Motor Off: 377 clicks/456, SndDpth:0.044m, buffer: 539, Cond:45.50mS/cm, Current: 1.61 amps. 2008/07/30 08:02:28 Retrieve: (WL) Motor Off: 377 clicks/456, SndDpth:0.033m, buffer: 411, Cond:45.49mS/cm, Current: 1.61 amps. 2008/07/30 08:02:34 Docking: Sonde at surface after 377 of 304 expected clicks. 2008/07/30 08:02:36 Docking: Raising sonde 75 clicks from waterline to home position. 2008/07/30 08:02:36 Docking: Setting motor to raise and reseting click counter. 2008/07/30 08:02:37 Docking: HIGH current error of 3.770 amps (1.400 A) on click 2(state 1)! 2008/07/30 08:02:37 Docking: Motor Off: 2 clicks/75, SndDpth:-0.002m, buffer: 255, Cond:0.70mS/cm, Current: 3.77 amps. 2008/07/30 08:02:39 Docking: Motor Off: 2 clicks/75, SndDpth:-0.002m, buffer: 115, Cond:0.67mS/cm, Current: 3.77 amps. 2008/07/30 08:02:39 Docking: Home position after 2 more clicks. Max current was 1.454 A. 2008/07/30 08:02:43 Saved 4512 of 4512 bytes to file 20080730.dat. 2008/07/30 08:03:00 Stored 687 WIND samples to memory. Velocity: 3.906m/s (7.6 knots), Direction:244.8 Compass:167.2 North: -1.664 East: -3.534 2008/07/30 08:03:01 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 08:27:00 INIT: ------- Initiating Cast Number 49 on AVP1_SERDP . Bat at 13.4 Volts, Software Version: 1.43 ---------- 2008/07/30 08:27:39 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.28 mS/cm. 2008/07/30 08:28:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 08:28:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 08:28:16 Waterline: stopped at Sonde Depth: 0.002 Click Count: 77/ 71 Conductivity: 45.95 Current: 0.614 Waterline: Motor Off: 77 clicks/71, SndDpth:0.002m, buffer: 293, Cond:45.95mS/cm, Current: 0.61 amps. 2008/07/30 08:28:16 Waterline: Initial Sonde Depth 0.002m. Conductivity: 45.95mS/cm. Waterline: Launch count is 77 clicks down from home position. 2008/07/30 08:28:16 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 08:28:21 Waterline: Attempting to collect 60 depth samples. 2008/07/30 08:29:21 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 08:29:23 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 08:30:00 Beginning Cast Number 49 2008/07/30 08:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 08:30:01 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 08:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 08:30:49 Cast: Motor Off: 286 clicks/297, SndDpth:1.658m, buffer: 770, Cond:99.99mS/cm, Current: 0.74 amps. 2008/07/30 08:31:11 Cast: Reached the bottom of cast 49. After 286 clicks, depth at bottom is 210.8 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:49.49 mS/cm. 2008/07/30 08:31:12 Retrieving sonde 429 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 08:31:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 08:32:15 Retrieve: (WL) HIGH current error of 1.605 amps (1.600 A) on click 362(state 4)! 2008/07/30 08:32:15 Retrieve: (WL) Motor Off: 362 clicks/429, SndDpth:0.011m, buffer: 580, Cond:45.33mS/cm, Current: 1.60 amps. 2008/07/30 08:32:17 Retrieve: (WL) Motor Off: 362 clicks/429, SndDpth:-0.002m, buffer: 485, Cond:45.33mS/cm, Current: 1.60 amps. 2008/07/30 08:32:23 ERROR: waterline sonde depth:-0.005m and conductivity of 5.00mS/cm at click 362 of 286. Attempting Re-home. 2008/07/30 08:32:24 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 08:32:25 Docking (Re-Home): Motor Off: 5 clicks/ 5, SndDpth:-0.005m, buffer: 74, Cond:5.00mS/cm, Current: 0.62 amps. 2008/07/30 08:32:26 Docking (Re-Home): Setting motor to raise and reseting click counter. 2008/07/30 08:32:27 Docking (Re-Home): HIGH current error of 1.426 amps (1.400 A) on click 4(state 1)! 2008/07/30 08:32:28 Docking (Re-Home): Motor Off: 4 clicks/1000, SndDpth:-0.005m, buffer: 148, Cond:5.00mS/cm, Current: 1.43 amps. 2008/07/30 08:32:28 Docking (Re-Home): Raised 4 clicks. Variance of -3 clicks. 2008/07/30 08:32:29 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 08:32:30 Docking (Re-Home): Motor Off: 5 clicks/ 2, SndDpth:-0.005m, buffer: 296, Cond:0.63mS/cm, Current: 0.62 amps. 2008/07/30 08:32:30 Docking (Re-Home): Lowered 5 of 2 clicks to HOME position. Docking (Re-Home): COMPLETE. 2008/07/30 08:32:31 Max current was 1.467 A. 2008/07/30 08:32:35 Saved 4225 of 4225 bytes to file 20080730.dat. 2008/07/30 08:32:52 Stored 672 WIND samples to memory. Velocity: 3.766m/s (7.3 knots), Direction:249.2 Compass:160.1 North: -1.340 East: -3.520 2008/07/30 08:32:53 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 08:57:00 INIT: ------- Initiating Cast Number 50 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.43 ---------- 2008/07/30 08:57:39 INIT: Calibrated sonde depth to 0.000m from -0.005m with Conductivity of 0.28 mS/cm. 2008/07/30 08:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 08:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 08:58:15 Waterline: stopped at Sonde Depth: 0.008 Click Count: 72/ 66 Conductivity: 45.44 Current: 0.731 Waterline: Motor Off: 72 clicks/66, SndDpth:0.008m, buffer: 296, Cond:45.44mS/cm, Current: 0.73 amps. 2008/07/30 08:58:15 Waterline: Initial Sonde Depth 0.008m. Conductivity: 45.44mS/cm. Waterline: Launch count is 72 clicks down from home position. 2008/07/30 08:58:15 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 08:58:20 Waterline: Attempting to collect 60 depth samples. 2008/07/30 08:59:20 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 246.0 249.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 08:59:22 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 09:00:00 Beginning Cast Number 50 2008/07/30 09:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 09:00:00 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 09:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 09:00:46 Cast: Motor Off: 276 clicks/297, SndDpth:1.652m, buffer: 740, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 09:01:09 Cast: Reached the bottom of cast 50. After 276 clicks, depth at bottom is 206.0 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:49.53 mS/cm. 2008/07/30 09:01:09 Retrieving sonde 414 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 09:01:09 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 09:02:10 Retrieve: HIGH current error of 1.612 amps (1.600 A) on click 353(state 2)! 2008/07/30 09:02:11 Retrieve: Motor Off: 353 clicks/414, SndDpth:0.114m, buffer: 636, Cond:44.88mS/cm, Current: 1.61 amps. 2008/07/30 09:02:12 Retrieve: Motor Off: 353 clicks/414, SndDpth:0.075m, buffer: 559, Cond:44.88mS/cm, Current: 1.61 amps. 2008/07/30 09:02:19 Docking: Sonde at surface after 353 of 276 expected clicks. 2008/07/30 09:02:22 Docking: Raising sonde 72 clicks from waterline to home position. 2008/07/30 09:02:22 Docking: Setting motor to raise and reseting click counter. 2008/07/30 09:02:22 Docking: HIGH current error of 4.368 amps (1.400 A) on click 2(state 0)! 2008/07/30 09:02:23 Docking: Motor Off: 2 clicks/72, SndDpth:0.000m, buffer: 215, Cond:0.65mS/cm, Current: 4.37 amps. 2008/07/30 09:02:24 Docking: Motor Off: 2 clicks/72, SndDpth:0.000m, buffer: 115, Cond:0.63mS/cm, Current: 4.37 amps. 2008/07/30 09:02:24 Docking: Home position after 2 more clicks. Max current was 1.532 A. 2008/07/30 09:02:28 Saved 4112 of 4112 bytes to file 20080730.dat. 2008/07/30 09:02:45 Stored 658 WIND samples to memory. Velocity: 4.014m/s (7.8 knots), Direction:252.8 Compass:157.7 North: -1.185 East: -3.835 2008/07/30 09:02:45 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 09:02:45 Cast number 50. Time to re-home sonde then tune motor idle current. 2008/07/30 09:02:46 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 09:02:47 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:0.000m, buffer: 0, Cond:0.63mS/cm, Current: 0.64 amps. 2008/07/30 09:02:48 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 09:02:49 Re-Home: HIGH current error of 1.424 amps (1.400 A) on click 4(state 11)! 2008/07/30 09:02:49 Re-Home: Motor Off: 4 clicks/1000, SndDpth:0.000m, buffer: 0, Cond:0.63mS/cm, Current: 1.42 amps. 2008/07/30 09:02:50 Re-Home: Raised 4 clicks. Variance of -3 clicks. 2008/07/30 09:02:51 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 09:02:52 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:0.000m, buffer: 0, Cond:0.63mS/cm, Current: 0.62 amps. 2008/07/30 09:02:52 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 09:02:52 Motor idle current changed from 208 to 208. 2008/07/30 09:27:00 INIT: ------- Initiating Cast Number 51 on AVP1_SERDP . Bat at 13.5 Volts, Software Version: 1.43 ---------- 2008/07/30 09:27:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 09:27:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 09:27:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 09:27:31 Waterline: stopped at Sonde Depth: 0.007 Click Count: 78/ 71 Conductivity: 44.73 Current: 0.685 Waterline: Motor Off: 78 clicks/71, SndDpth:0.007m, buffer: 296, Cond:44.73mS/cm, Current: 0.68 amps. 2008/07/30 09:27:32 Waterline: Initial Sonde Depth 0.007m. Conductivity: 44.73mS/cm. Waterline: Launch count is 78 clicks down from home position. 2008/07/30 09:27:32 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 09:27:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 09:28:43 Success collecting 60 depth samples. 60 Sorted Depth Values: 152.0 155.0 155.0 161.0 167.0 170.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 252.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 09:28:45 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 09:30:00 Beginning Cast Number 51 2008/07/30 09:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 09:30:01 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 09:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 09:30:50 Cast: Motor Off: 299 clicks/297, SndDpth:1.674m, buffer: 817, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 09:31:14 Cast: Reached the bottom of cast 51. After 299 clicks, depth at bottom is 167.4 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:99.99 mS/cm. 2008/07/30 09:31:15 Retrieving sonde 448 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 09:31:15 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 09:32:21 Retrieve: HIGH current error of 1.642 amps (1.600 A) on click 377(state 5)! 2008/07/30 09:32:21 Retrieve: Motor Off: 377 clicks/448, SndDpth:0.067m, buffer: 666, Cond:44.40mS/cm, Current: 1.64 amps. 2008/07/30 09:32:22 Retrieve: Motor Off: 377 clicks/448, SndDpth:0.020m, buffer: 550, Cond:44.39mS/cm, Current: 1.64 amps. 2008/07/30 09:32:29 Docking: Sonde at surface after 377 of 299 expected clicks. 2008/07/30 09:32:32 Docking: Raising sonde 78 clicks from waterline to home position. 2008/07/30 09:32:32 Docking: Setting motor to raise and reseting click counter. 2008/07/30 09:32:33 Docking: HIGH current error of 5.389 amps (1.400 A) on click 2(state 1)! 2008/07/30 09:32:33 Docking: Motor Off: 2 clicks/78, SndDpth:0.005m, buffer: 222, Cond:0.65mS/cm, Current: 5.39 amps. 2008/07/30 09:32:33 Docking: Motor Off: 2 clicks/78, SndDpth:0.005m, buffer: 222, Cond:0.62mS/cm, Current: 5.39 amps. 2008/07/30 09:32:33 Docking: Home position after 2 more clicks. Max current was 1.599 A. 2008/07/30 09:32:37 Saved 2958 of 2958 bytes to file 20080730.dat. 2008/07/30 09:32:55 Stored 677 WIND samples to memory. Velocity: 2.943m/s (5.7 knots), Direction:260.1 Compass:153.6 North: -0.507 East: -2.899 2008/07/30 09:32:55 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 09:57:00 INIT: ------- Initiating Cast Number 52 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.43 ---------- 2008/07/30 09:57:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/30 09:58:12 INIT: Calibrated sonde depth to 0.000m from 0.004m with Conductivity of 0.28 mS/cm. 2008/07/30 09:58:35 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 09:58:36 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 09:58:45 Waterline: stopped at Sonde Depth: -0.001 Click Count: 56/ 55 Conductivity: 0.53 Current: 0.695 Waterline: Motor Off: 56 clicks/55, SndDpth:-0.001m, buffer: 222, Cond:0.53mS/cm, Current: 0.70 amps. 2008/07/30 09:58:45 Waterline: Initial Sonde Depth -0.001m. Conductivity: 0.53mS/cm. Waterline: Launch count is 56 clicks down from home position. 2008/07/30 09:58:46 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 09:58:50 Waterline: Attempting to collect 60 depth samples. 2008/07/30 09:59:50 Success collecting 60 depth samples. 60 Sorted Depth Values: 161.0 167.0 167.0 167.0 170.0 170.0 170.0 170.0 170.0 170.0 170.0 170.0 173.0 173.0 173.0 176.0 176.0 179.0 182.0 188.0 192.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 09:59:52 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 10:00:28 Beginning Cast Number 52 2008/07/30 10:00:28 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 10:00:28 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 10:00:28 Cast: Setting motor to lower and reseting click counter. 2008/07/30 10:01:18 Cast: Motor Off: 301 clicks/297, SndDpth:1.610m, buffer: 814, Cond:99.99mS/cm, Current: 0.74 amps. 2008/07/30 10:01:40 Cast: Reached the bottom of cast 52. After 301 clicks, depth at bottom is 206.1 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:49.17 mS/cm. 2008/07/30 10:01:41 Retrieving sonde 451 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 10:01:41 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 10:02:43 Retrieve: HIGH current error of 1.686 amps (1.600 A) on click 356(state 3)! 2008/07/30 10:02:43 Retrieve: Motor Off: 356 clicks/451, SndDpth:0.099m, buffer: 622, Cond:44.28mS/cm, Current: 1.69 amps. 2008/07/30 10:02:44 Retrieve: Motor Off: 356 clicks/451, SndDpth:0.077m, buffer: 666, Cond:44.27mS/cm, Current: 1.69 amps. 2008/07/30 10:02:51 ERROR: waterline sonde depth:0.002m and conductivity of 6.00mS/cm at click 356 of 301. Attempting Re-home. 2008/07/30 10:02:52 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 10:02:53 Docking (Re-Home): Motor Off: 5 clicks/ 5, SndDpth:0.002m, buffer: 74, Cond:6.00mS/cm, Current: 0.68 amps. 2008/07/30 10:02:54 Docking (Re-Home): Setting motor to raise and reseting click counter. 2008/07/30 10:02:55 Docking (Re-Home): HIGH current error of 1.589 amps (1.400 A) on click 5(state 0)! 2008/07/30 10:02:56 Docking (Re-Home): Motor Off: 5 clicks/1000, SndDpth:-0.001m, buffer: 222, Cond:0.63mS/cm, Current: 1.59 amps. 2008/07/30 10:02:57 Docking (Re-Home): Raised 5 clicks. Variance of -2 clicks. 2008/07/30 10:02:58 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 10:02:59 Docking (Re-Home): Motor Off: 2 clicks/ 2, SndDpth:-0.002m, buffer: 148, Cond:0.62mS/cm, Current: 0.62 amps. 2008/07/30 10:02:59 Docking (Re-Home): Lowered 2 of 2 clicks to HOME position. Docking (Re-Home): COMPLETE. 2008/07/30 10:03:00 Max current was 1.449 A. 2008/07/30 10:03:04 Saved 4512 of 4512 bytes to file 20080730.dat. 2008/07/30 10:03:21 Stored 726 WIND samples to memory. Velocity: 3.315m/s (6.4 knots), Direction:249.7 Compass:152.3 North: -1.152 East: -3.108 2008/07/30 10:03:21 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 10:27:00 INIT: ------- Initiating Cast Number 53 on AVP1_SERDP . Bat at 13.5 Volts, Software Version: 1.43 ---------- 2008/07/30 10:27:19 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 10:27:19 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 10:27:19 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 10:27:32 Waterline: stopped at Sonde Depth: 0.000 Click Count: 76/ 70 Conductivity: 44.18 Current: 0.709 Waterline: Motor Off: 76 clicks/70, SndDpth:0.000m, buffer: 296, Cond:44.18mS/cm, Current: 0.71 amps. 2008/07/30 10:27:32 Waterline: Initial Sonde Depth 0.000m. Conductivity: 44.18mS/cm. Waterline: Launch count is 76 clicks down from home position. 2008/07/30 10:27:33 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 10:27:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 10:28:37 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 246.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 10:28:39 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 10:30:01 Beginning Cast Number 53 2008/07/30 10:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 10:30:01 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 10:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 10:30:51 Cast: Motor Off: 299 clicks/297, SndDpth:1.780m, buffer: 814, Cond:99.99mS/cm, Current: 0.76 amps. 2008/07/30 10:31:25 Cast: Reached the bottom of cast 53. After 299 clicks, depth at bottom is 213.9 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:48.83 mS/cm. 2008/07/30 10:31:26 Retrieving sonde 448 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 10:31:26 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 10:32:32 Retrieve: HIGH current error of 1.633 amps (1.600 A) on click 375(state 0)! 2008/07/30 10:32:32 Retrieve: Motor Off: 375 clicks/448, SndDpth:0.098m, buffer: 645, Cond:44.12mS/cm, Current: 1.63 amps. 2008/07/30 10:32:33 Retrieve: Motor Off: 375 clicks/448, SndDpth:0.076m, buffer: 485, Cond:44.12mS/cm, Current: 1.63 amps. 2008/07/30 10:32:40 Docking: Sonde at surface after 375 of 299 expected clicks. 2008/07/30 10:32:43 Docking: Raising sonde 76 clicks from waterline to home position. 2008/07/30 10:32:43 Docking: Setting motor to raise and reseting click counter. 2008/07/30 10:32:43 Docking: HIGH current error of 4.870 amps (1.400 A) on click 2(state 1)! 2008/07/30 10:32:44 Docking: Motor Off: 2 clicks/76, SndDpth:0.001m, buffer: 180, Cond:0.66mS/cm, Current: 4.87 amps. 2008/07/30 10:32:45 Docking: Motor Off: 2 clicks/76, SndDpth:0.000m, buffer: 115, Cond:0.63mS/cm, Current: 4.87 amps. 2008/07/30 10:32:45 Docking: Home position after 2 more clicks. Max current was 1.532 A. 2008/07/30 10:32:50 Saved 4438 of 4438 bytes to file 20080730.dat. 2008/07/30 10:33:07 Stored 700 WIND samples to memory. Velocity: 3.415m/s (6.6 knots), Direction:248.5 Compass:151.5 North: -1.252 East: -3.177 2008/07/30 10:33:07 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 10:57:00 INIT: ------- Initiating Cast Number 54 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.43 ---------- 2008/07/30 10:57:39 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.27 mS/cm. 2008/07/30 10:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 10:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 10:58:16 Waterline: stopped at Sonde Depth: 0.001 Click Count: 77/ 72 Conductivity: 44.40 Current: 0.690 Waterline: Motor Off: 77 clicks/72, SndDpth:0.001m, buffer: 287, Cond:44.40mS/cm, Current: 0.69 amps. 2008/07/30 10:58:16 Waterline: Initial Sonde Depth 0.001m. Conductivity: 44.40mS/cm. Waterline: Launch count is 77 clicks down from home position. 2008/07/30 10:58:16 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 10:58:21 Waterline: Attempting to collect 60 depth samples. 2008/07/30 10:59:21 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 243.0 243.0 246.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 10:59:23 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 11:00:00 Beginning Cast Number 54 2008/07/30 11:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 11:00:01 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 11:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 11:00:48 Cast: Motor Off: 286 clicks/291, SndDpth:1.631m, buffer: 740, Cond:99.99mS/cm, Current: 0.84 amps. 2008/07/30 11:01:11 Cast: Reached the bottom of cast 54. After 286 clicks, depth at bottom is 208.8 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:48.46 mS/cm. 2008/07/30 11:01:11 Retrieving sonde 429 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 11:01:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 11:02:15 Retrieve: HIGH current error of 1.805 amps (1.600 A) on click 363(state 0)! 2008/07/30 11:02:15 Retrieve: Motor Off: 363 clicks/429, SndDpth:0.143m, buffer: 595, Cond:44.29mS/cm, Current: 1.80 amps. 2008/07/30 11:02:17 Retrieve: Motor Off: 363 clicks/429, SndDpth:0.113m, buffer: 522, Cond:44.29mS/cm, Current: 1.80 amps. 2008/07/30 11:02:24 Docking: Sonde at surface after 363 of 286 expected clicks. 2008/07/30 11:02:26 Docking: Raising sonde 77 clicks from waterline to home position. 2008/07/30 11:02:26 Docking: Setting motor to raise and reseting click counter. 2008/07/30 11:02:27 Docking: HIGH current error of 5.403 amps (1.400 A) on click 2(state 1)! 2008/07/30 11:02:27 Docking: Motor Off: 2 clicks/77, SndDpth:0.002m, buffer: 239, Cond:0.64mS/cm, Current: 5.40 amps. 2008/07/30 11:02:28 Docking: Motor Off: 2 clicks/77, SndDpth:0.001m, buffer: 115, Cond:0.62mS/cm, Current: 5.40 amps. 2008/07/30 11:02:29 Docking: Home position after 2 more clicks. Max current was 1.592 A. 2008/07/30 11:02:33 Saved 4260 of 4260 bytes to file 20080730.dat. 2008/07/30 11:02:49 Stored 667 WIND samples to memory. Velocity: 3.829m/s (7.4 knots), Direction:235.4 Compass:153.9 North: -2.177 East: -3.150 2008/07/30 11:02:50 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 11:27:00 INIT: ------- Initiating Cast Number 55 on AVP1_SERDP . Bat at 13.5 Volts, Software Version: 1.43 ---------- 2008/07/30 11:27:40 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.27 mS/cm. 2008/07/30 11:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 11:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 11:28:13 Waterline: stopped at Sonde Depth: 0.000 Click Count: 56/ 55 Conductivity: 1.41 Current: 0.630 Waterline: Motor Off: 56 clicks/55, SndDpth:0.000m, buffer: 222, Cond:1.41mS/cm, Current: 0.63 amps. 2008/07/30 11:28:13 Waterline: Initial Sonde Depth 0.000m. Conductivity: 1.41mS/cm. Waterline: Launch count is 56 clicks down from home position. 2008/07/30 11:28:14 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 11:28:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 11:29:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 170.0 179.0 179.0 182.0 185.0 185.0 188.0 195.0 195.0 195.0 201.0 207.0 207.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 11:29:20 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 11:30:00 Beginning Cast Number 55 2008/07/30 11:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 11:30:00 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 11:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 11:30:49 Cast: Motor Off: 292 clicks/291, SndDpth:1.554m, buffer: 814, Cond:99.99mS/cm, Current: 0.77 amps. 2008/07/30 11:31:13 Cast: Reached the bottom of cast 55. After 292 clicks, depth at bottom is 200.5 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:46.47 mS/cm. 2008/07/30 11:31:13 Retrieving sonde 438 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 11:31:14 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 11:32:14 Retrieve: HIGH current error of 1.654 amps (1.600 A) on click 344(state 2)! 2008/07/30 11:32:14 Retrieve: Motor Off: 344 clicks/438, SndDpth:0.123m, buffer: 560, Cond:43.47mS/cm, Current: 1.65 amps. 2008/07/30 11:32:15 Retrieve: Motor Off: 344 clicks/438, SndDpth:0.094m, buffer: 485, Cond:43.47mS/cm, Current: 1.65 amps. 2008/07/30 11:32:22 ERROR: waterline sonde depth:0.005m and conductivity of 5.00mS/cm at click 344 of 292. Attempting Re-home. 2008/07/30 11:32:22 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 11:32:24 Docking (Re-Home): Motor Off: 5 clicks/ 5, SndDpth:0.005m, buffer: 74, Cond:5.00mS/cm, Current: 0.67 amps. 2008/07/30 11:32:25 Docking (Re-Home): Setting motor to raise and reseting click counter. 2008/07/30 11:32:26 Docking (Re-Home): HIGH current error of 1.902 amps (1.400 A) on click 5(state 0)! 2008/07/30 11:32:26 Docking (Re-Home): Motor Off: 5 clicks/1000, SndDpth:0.002m, buffer: 219, Cond:0.62mS/cm, Current: 1.90 amps. 2008/07/30 11:32:28 Docking (Re-Home): Raised 5 clicks. Variance of -2 clicks. 2008/07/30 11:32:29 Docking (Re-Home): Setting motor to lower and reseting click counter. 2008/07/30 11:32:30 Docking (Re-Home): Motor Off: 2 clicks/ 2, SndDpth:0.001m, buffer: 148, Cond:0.61mS/cm, Current: 0.66 amps. 2008/07/30 11:32:30 Docking (Re-Home): Lowered 2 of 2 clicks to HOME position. Docking (Re-Home): COMPLETE. 2008/07/30 11:32:30 Max current was 1.564 A. 2008/07/30 11:32:35 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 11:32:51 Stored 670 WIND samples to memory. Velocity: 4.100m/s (8.0 knots), Direction:245.0 Compass:152.1 North: -1.734 East: -3.715 2008/07/30 11:32:52 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 11:32:52 Cast number 55. Time to re-home sonde then tune motor idle current. 2008/07/30 11:32:52 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 11:32:54 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:0.001m, buffer: 0, Cond:0.61mS/cm, Current: 0.70 amps. 2008/07/30 11:32:55 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 11:32:56 Re-Home: HIGH current error of 1.490 amps (1.400 A) on click 7(state 0)! 2008/07/30 11:32:57 Re-Home: Motor Off: 7 clicks/1000, SndDpth:0.001m, buffer: 0, Cond:0.61mS/cm, Current: 1.49 amps. 2008/07/30 11:32:57 Re-Home: Raised 7 clicks. Variance of 0 clicks. 2008/07/30 11:32:58 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 11:32:59 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:0.001m, buffer: 0, Cond:0.61mS/cm, Current: 0.67 amps. 2008/07/30 11:32:59 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 11:32:59 Motor idle current changed from 208 to 224. 2008/07/30 11:48:36 Console: Motor Off: 2 clicks/ 2, SndDpth:0.001m, buffer: 0, Cond:0.61mS/cm, Current: 0.67 amps. 2008/07/30 11:48:37 Ctrl-C received 2008/07/30 11:48:40 DONE 2008/07/30 11:51:54 INIT: ------- Initiating Cast Number 1 on AVP1_SERDP . Bat at 13.4 Volts, Software Version: 1.44 ---------- 2008/07/30 11:51:54 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 11:51:54 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 11:51:54 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 11:52:05 Waterline: stopped at Sonde Depth: 0.000 Click Count: 61/ 55 Conductivity: 0.29 Current: 0.639 Waterline: Motor Off: 61 clicks/55, SndDpth:0.000m, buffer: 444, Cond:0.29mS/cm, Current: 0.64 amps. 2008/07/30 11:52:05 Waterline: Initial Sonde Depth 0.000m. Conductivity: 0.29mS/cm. Waterline: Launch count is 61 clicks down from home position. 2008/07/30 11:52:06 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 11:52:10 Waterline: Attempting to collect 60 depth samples. 2008/07/30 11:53:10 Success collecting 60 depth samples. 60 Sorted Depth Values: 185.0 188.0 192.0 192.0 192.0 195.0 195.0 198.0 198.0 201.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 11:53:12 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 11:53:28 Beginning Cast Number 1 2008/07/30 11:53:28 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 11:53:28 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 11:53:28 Cast: Setting motor to lower and reseting click counter. 2008/07/30 11:54:16 Cast: Motor Off: 285 clicks/286, SndDpth:1.592m, buffer: 740, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 11:54:36 Cast: Reached the bottom of cast 1. After 285 clicks, depth at bottom is 204.4 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:45.45 mS/cm. 2008/07/30 11:54:37 Retrieving sonde 427 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 11:54:37 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 11:55:39 Retrieve: HIGH current error of 1.930 amps (1.600 A) on click 355(state 0)! 2008/07/30 11:55:40 Retrieve: Motor Off: 355 clicks/427, SndDpth:0.097m, buffer: 505, Cond:43.31mS/cm, Current: 1.93 amps. 2008/07/30 11:55:41 Retrieve: Motor Off: 355 clicks/427, SndDpth:0.074m, buffer: 411, Cond:43.31mS/cm, Current: 1.93 amps. 2008/07/30 11:55:58 Docking: Sonde at surface after 355 of 285 expected clicks. 2008/07/30 11:56:01 Docking: Raising sonde 61 clicks from waterline to home position. 2008/07/30 11:56:01 Docking: Setting motor to raise and reseting click counter. 2008/07/30 11:56:02 Docking: HIGH current error of 5.406 amps (1.400 A) on click 2(state 1)! 2008/07/30 11:56:02 Docking: Motor Off: 2 clicks/61, SndDpth:-0.001m, buffer: 314, Cond:0.51mS/cm, Current: 5.41 amps. 2008/07/30 11:56:03 Docking: Motor Off: 2 clicks/61, SndDpth:-0.001m, buffer: 189, Cond:0.50mS/cm, Current: 5.41 amps. 2008/07/30 11:56:03 Docking: Home position after 2 more clicks. Max current was 1.506 A. 2008/07/30 11:56:07 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 11:56:26 Stored 519 WIND samples to memory. Velocity: 4.163m/s (8.1 knots), Direction:236.6 Compass:154.5 North: -2.289 East: -3.477 2008/07/30 11:56:27 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 11:57:00 INIT: ------- Initiating Cast Number 2 on AVP1_SERDP . Bat at 13.5 Volts, Software Version: 1.44 ---------- 2008/07/30 11:57:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 11:57:21 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 11:57:21 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 11:57:34 Waterline: stopped at Sonde Depth: -0.001 Click Count: 76/ 69 Conductivity: 43.38 Current: 0.662 Waterline: Motor Off: 76 clicks/69, SndDpth:-0.001m, buffer: 296, Cond:43.38mS/cm, Current: 0.66 amps. 2008/07/30 11:57:34 Waterline: Initial Sonde Depth -0.001m. Conductivity: 43.38mS/cm. Waterline: Launch count is 76 clicks down from home position. 2008/07/30 11:57:34 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 11:57:39 Waterline: Attempting to collect 60 depth samples. 2008/07/30 11:58:39 Success collecting 60 depth samples. 60 Sorted Depth Values: 173.0 173.0 173.0 182.0 185.0 185.0 185.0 188.0 192.0 198.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 249.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 11:58:41 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 12:00:00 Beginning Cast Number 2 2008/07/30 12:00:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 12:00:01 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 12:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 12:00:48 Cast: Motor Off: 280 clicks/286, SndDpth:1.648m, buffer: 740, Cond:99.99mS/cm, Current: 0.71 amps. 2008/07/30 12:01:20 Cast: Reached the bottom of cast 2. After 280 clicks, depth at bottom is 204.2 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:45.17 mS/cm. 2008/07/30 12:01:21 Retrieving sonde 420 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 12:01:21 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 12:02:23 Retrieve: (WL) HIGH current error of 1.989 amps (1.600 A) on click 354(state 0)! 2008/07/30 12:02:23 Retrieve: (WL) Motor Off: 354 clicks/420, SndDpth:0.021m, buffer: 599, Cond:43.30mS/cm, Current: 1.99 amps. 2008/07/30 12:02:24 Retrieve: (WL) Motor Off: 354 clicks/420, SndDpth:0.012m, buffer: 485, Cond:43.29mS/cm, Current: 1.99 amps. 2008/07/30 12:02:42 Docking: Sonde at surface after 354 of 280 expected clicks. 2008/07/30 12:02:45 Docking: Raising sonde 76 clicks from waterline to home position. 2008/07/30 12:02:45 Docking: Setting motor to raise and reseting click counter. 2008/07/30 12:02:46 Docking: HIGH current error of 5.414 amps (1.400 A) on click 2(state 1)! 2008/07/30 12:02:46 Docking: Motor Off: 2 clicks/76, SndDpth:-0.006m, buffer: 277, Cond:0.56mS/cm, Current: 5.41 amps. 2008/07/30 12:02:47 Docking: Motor Off: 2 clicks/76, SndDpth:-0.006m, buffer: 189, Cond:0.55mS/cm, Current: 5.41 amps. 2008/07/30 12:02:47 Docking: Home position after 2 more clicks. Max current was 1.569 A. 2008/07/30 12:02:52 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 12:03:11 Stored 706 WIND samples to memory. Velocity: 3.686m/s (7.2 knots), Direction:243.5 Compass:168.4 North: -1.644 East: -3.299 2008/07/30 12:03:11 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 12:27:00 INIT: ------- Initiating Cast Number 3 on AVP1_SERDP . Bat at 13.4 Volts, Software Version: 1.44 ---------- 2008/07/30 12:27:31 ERROR: Timeout while initiating sonde data, trying again... 2008/07/30 12:28:12 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.26 mS/cm. 2008/07/30 12:28:35 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 12:28:36 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 12:28:49 Waterline: stopped at Sonde Depth: -0.005 Click Count: 78/ 72 Conductivity: 43.06 Current: 0.717 Waterline: Motor Off: 78 clicks/72, SndDpth:-0.005m, buffer: 296, Cond:43.06mS/cm, Current: 0.72 amps. 2008/07/30 12:28:49 Waterline: Initial Sonde Depth -0.005m. Conductivity: 43.06mS/cm. Waterline: Launch count is 78 clicks down from home position. 2008/07/30 12:28:49 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 12:28:54 Waterline: Attempting to collect 60 depth samples. 2008/07/30 12:29:54 Success collecting 60 depth samples. 60 Sorted Depth Values: 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 12:29:56 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 12:30:32 Beginning Cast Number 3 2008/07/30 12:30:32 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 12:30:32 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 12:30:32 Cast: Setting motor to lower and reseting click counter. 2008/07/30 12:31:18 Cast: Motor Off: 276 clicks/286, SndDpth:1.640m, buffer: 740, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 12:31:39 Cast: Reached the bottom of cast 3. After 276 clicks, depth at bottom is 203.0 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:45.42 mS/cm. 2008/07/30 12:31:39 Retrieving sonde 414 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 12:31:40 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 12:32:41 Retrieve: (WL) HIGH current error of 1.923 amps (1.600 A) on click 351(state 0)! 2008/07/30 12:32:41 Retrieve: (WL) Motor Off: 351 clicks/414, SndDpth:0.055m, buffer: 592, Cond:42.99mS/cm, Current: 1.92 amps. 2008/07/30 12:32:43 Retrieve: (WL) Motor Off: 351 clicks/414, SndDpth:0.041m, buffer: 443, Cond:42.97mS/cm, Current: 1.92 amps. 2008/07/30 12:33:01 Docking: Sonde at surface after 351 of 276 expected clicks. 2008/07/30 12:33:03 Docking: Raising sonde 78 clicks from waterline to home position. 2008/07/30 12:33:03 Docking: Setting motor to raise and reseting click counter. 2008/07/30 12:33:04 Docking: HIGH current error of 5.424 amps (1.400 A) on click 2(state 1)! 2008/07/30 12:33:04 Docking: Motor Off: 2 clicks/78, SndDpth:-0.004m, buffer: 230, Cond:0.51mS/cm, Current: 5.42 amps. 2008/07/30 12:33:06 Docking: Motor Off: 2 clicks/78, SndDpth:-0.004m, buffer: 115, Cond:0.50mS/cm, Current: 5.42 amps. 2008/07/30 12:33:06 Docking: Home position after 2 more clicks. Max current was 1.594 A. 2008/07/30 12:33:10 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 12:33:29 Stored 741 WIND samples to memory. Velocity: 4.028m/s (7.8 knots), Direction:234.3 Compass:176.1 North: -2.351 East: -3.270 2008/07/30 12:33:29 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 12:57:00 INIT: ------- Initiating Cast Number 4 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.44 ---------- 2008/07/30 12:57:39 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.27 mS/cm. 2008/07/30 12:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 12:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 12:58:15 Waterline: stopped at Sonde Depth: -0.001 Click Count: 77/ 71 Conductivity: 42.98 Current: 0.651 Waterline: Motor Off: 77 clicks/71, SndDpth:-0.001m, buffer: 252, Cond:42.98mS/cm, Current: 0.65 amps. 2008/07/30 12:58:16 Waterline: Initial Sonde Depth -0.001m. Conductivity: 42.98mS/cm. Waterline: Launch count is 77 clicks down from home position. 2008/07/30 12:58:16 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 12:58:20 Waterline: Attempting to collect 60 depth samples. 2008/07/30 12:59:21 Success collecting 60 depth samples. 60 Sorted Depth Values: 225.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 237.0 237.0 240.0 246.0 246.0 246.0 Setting working depth from surface to: 234.0 cm. 2008/07/30 12:59:23 Waterline: Working Depth is 234.0, Target Depth is 159.0 2008/07/30 13:00:00 Beginning Cast Number 4 2008/07/30 13:00:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 13:00:01 Cast: lowering to 159.0 cm, or 286 clicks. 2008/07/30 13:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 13:00:48 Cast: Motor Off: 284 clicks/286, SndDpth:1.696m, buffer: 740, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 13:01:11 Cast: Reached the bottom of cast 4. After 284 clicks, depth at bottom is 204.6 cm. Cast: Target was 286 clicks or a final depth of 159.0 cm. Cast: Conductivity is:45.20 mS/cm. 2008/07/30 13:01:11 Retrieving sonde 426 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 13:01:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 13:02:14 Retrieve: HIGH current error of 1.690 amps (1.600 A) on click 360(state 1)! 2008/07/30 13:02:15 Retrieve: Motor Off: 360 clicks/426, SndDpth:0.089m, buffer: 621, Cond:43.06mS/cm, Current: 1.69 amps. 2008/07/30 13:02:16 Retrieve: Motor Off: 360 clicks/426, SndDpth:0.067m, buffer: 485, Cond:43.04mS/cm, Current: 1.69 amps. 2008/07/30 13:02:34 Docking: Sonde at surface after 360 of 284 expected clicks. 2008/07/30 13:02:37 Docking: Raising sonde 77 clicks from waterline to home position. 2008/07/30 13:02:37 Docking: Setting motor to raise and reseting click counter. 2008/07/30 13:02:38 Docking: HIGH current error of 5.415 amps (1.400 A) on click 2(state 0)! 2008/07/30 13:02:38 Docking: Motor Off: 2 clicks/77, SndDpth:-0.008m, buffer: 296, Cond:0.53mS/cm, Current: 5.42 amps. 2008/07/30 13:02:38 Docking: Motor Off: 2 clicks/77, SndDpth:-0.008m, buffer: 296, Cond:0.52mS/cm, Current: 5.42 amps. 2008/07/30 13:02:38 Docking: Home position after 2 more clicks. Max current was 1.587 A. 2008/07/30 13:02:43 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 13:03:02 Stored 689 WIND samples to memory. Velocity: 4.118m/s (8.0 knots), Direction:185.3 Compass:171.6 North: -4.100 East: -0.383 2008/07/30 13:03:02 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 13:27:00 INIT: ------- Initiating Cast Number 5 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.44 ---------- 2008/07/30 13:27:41 INIT: Calibrated sonde depth to 0.000m from -0.008m with Conductivity of 0.27 mS/cm. 2008/07/30 13:28:05 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 13:28:05 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 13:28:14 Waterline: stopped at Sonde Depth: 1.796 Click Count: 54/ 55 Conductivity: 0.37 Current: 0.672 Waterline: Motor Off: 54 clicks/55, SndDpth:1.796m, buffer: 222, Cond:0.37mS/cm, Current: 0.67 amps. 2008/07/30 13:28:14 Waterline: Initial Sonde Depth 1.796m. Conductivity: 0.37mS/cm. Waterline: Launch count is 54 clicks down from home position. 2008/07/30 13:28:15 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 13:28:19 Waterline: Attempting to collect 60 depth samples. 2008/07/30 13:29:19 Success collecting 60 depth samples. 60 Sorted Depth Values: 222.0 222.0 222.0 222.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 231.0 234.0 Setting working depth from surface to: 228.0 cm. 2008/07/30 13:29:21 Waterline: Working Depth is 228.0, Target Depth is 153.0 2008/07/30 13:30:00 Beginning Cast Number 5 2008/07/30 13:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 13:30:01 Cast: lowering to 153.0 cm, or 275 clicks. 2008/07/30 13:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 13:30:07 Cast: Reached the bottom of cast 5. After 0 clicks, depth at bottom is 1.8 cm. Cast: Target was 275 clicks or a final depth of 153.0 cm. Cast: Conductivity is:43.09 mS/cm. 2008/07/30 13:30:07 Retrieving sonde 426 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 13:30:07 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 13:30:08 Retrieve: (WL) Motor Off: 2 clicks/426, SndDpth:0.018m, buffer: 45, Cond:43.09mS/cm, Current: 0.85 amps. 2008/07/30 13:30:11 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 13:30:19 Retrieve: (WL) Motor Off: 47 clicks/426, SndDpth:0.002m, buffer: 222, Cond:1.39mS/cm, Current: 0.91 amps. 2008/07/30 13:30:35 Docking: Sonde at surface after 47 of 284 expected clicks. 2008/07/30 13:30:37 Docking: Raising sonde 54 clicks from waterline to home position. 2008/07/30 13:30:37 Docking: Setting motor to raise and reseting click counter. 2008/07/30 13:30:39 Docking: HIGH current error of 1.472 amps (1.400 A) on click 6(state 1)! 2008/07/30 13:30:39 Docking: Motor Off: 6 clicks/54, SndDpth:-0.002m, buffer: 296, Cond:0.63mS/cm, Current: 1.47 amps. 2008/07/30 13:30:39 Docking: Motor Off: 6 clicks/54, SndDpth:-0.002m, buffer: 326, Cond:0.61mS/cm, Current: 1.47 amps. 2008/07/30 13:30:39 Docking: Home position after 6 more clicks. Max current was 1.560 A. 2008/07/30 13:30:43 Saved 294 of 294 bytes to file 20080730.dat. 2008/07/30 13:30:51 Stored 440 WIND samples to memory. Velocity: 5.825m/s (11.3 knots), Direction:184.6 Compass:179.3 North: -5.806 East: -0.468 2008/07/30 13:30:51 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 13:30:51 Cast number 5. Time to re-home sonde then tune motor idle current. 2008/07/30 13:30:52 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 13:30:53 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.002m, buffer: 0, Cond:0.61mS/cm, Current: 0.67 amps. 2008/07/30 13:30:54 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 13:30:55 Re-Home: HIGH current error of 1.649 amps (1.400 A) on click 5(state 0)! 2008/07/30 13:30:56 Re-Home: Motor Off: 5 clicks/1000, SndDpth:-0.002m, buffer: 0, Cond:0.61mS/cm, Current: 1.65 amps. 2008/07/30 13:30:56 Re-Home: Raised 5 clicks. Variance of -2 clicks. 2008/07/30 13:30:57 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 13:30:58 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.002m, buffer: 0, Cond:0.61mS/cm, Current: 0.61 amps. 2008/07/30 13:30:58 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 13:30:58 Motor idle current changed from 240 to 224. 2008/07/30 13:57:00 INIT: ------- Initiating Cast Number 6 on AVP1_SERDP . Bat at 13.4 Volts, Software Version: 1.44 ---------- 2008/07/30 13:57:39 INIT: Calibrated sonde depth to 0.000m from -0.003m with Conductivity of 0.28 mS/cm. 2008/07/30 13:58:03 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 13:58:03 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 13:58:12 Waterline: stopped at Sonde Depth: 1.607 Click Count: 56/ 55 Conductivity: 0.51 Current: 0.706 Waterline: Motor Off: 56 clicks/55, SndDpth:1.607m, buffer: 222, Cond:0.51mS/cm, Current: 0.71 amps. 2008/07/30 13:58:13 Waterline: Initial Sonde Depth 1.607m. Conductivity: 0.51mS/cm. Waterline: Launch count is 56 clicks down from home position. 2008/07/30 13:58:13 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 13:58:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 13:59:19 Success collecting 60 depth samples. 60 Sorted Depth Values: 158.0 161.0 164.0 170.0 170.0 176.0 182.0 185.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 231.0 240.0 Setting working depth from surface to: 228.0 cm. 2008/07/30 13:59:21 Waterline: Working Depth is 228.0, Target Depth is 153.0 2008/07/30 14:00:00 Beginning Cast Number 6 2008/07/30 14:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 14:00:00 Cast: lowering to 153.0 cm, or 275 clicks. 2008/07/30 14:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 14:00:06 Cast: Reached the bottom of cast 6. After 0 clicks, depth at bottom is 4.0 cm. Cast: Target was 275 clicks or a final depth of 153.0 cm. Cast: Conductivity is:43.14 mS/cm. 2008/07/30 14:00:07 Retrieving sonde 426 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 14:00:07 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 14:00:08 Retrieve: (WL) Motor Off: 2 clicks/426, SndDpth:0.040m, buffer: 74, Cond:43.14mS/cm, Current: 0.84 amps. 2008/07/30 14:00:13 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 14:00:21 Retrieve: (WL) Motor Off: 47 clicks/426, SndDpth:0.008m, buffer: 213, Cond:1.39mS/cm, Current: 0.88 amps. 2008/07/30 14:00:37 Docking: Sonde at surface after 47 of 284 expected clicks. 2008/07/30 14:00:39 Docking: Raising sonde 56 clicks from waterline to home position. 2008/07/30 14:00:39 Docking: Setting motor to raise and reseting click counter. 2008/07/30 14:00:41 Docking: HIGH current error of 1.484 amps (1.400 A) on click 9(state 1)! 2008/07/30 14:00:41 Docking: Motor Off: 9 clicks/56, SndDpth:-0.002m, buffer: 331, Cond:0.57mS/cm, Current: 1.48 amps. 2008/07/30 14:00:43 Docking: Motor Off: 9 clicks/56, SndDpth:-0.002m, buffer: 189, Cond:0.56mS/cm, Current: 1.48 amps. 2008/07/30 14:00:43 Docking: Home position after 9 more clicks. Max current was 1.596 A. 2008/07/30 14:00:47 Saved 294 of 294 bytes to file 20080730.dat. 2008/07/30 14:00:55 Stored 448 WIND samples to memory. Velocity: 6.532m/s (12.7 knots), Direction:180.3 Compass:174.7 North: -6.532 East: -0.030 2008/07/30 14:00:56 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 14:27:00 INIT: ------- Initiating Cast Number 7 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.44 ---------- 2008/07/30 14:27:40 INIT: Calibrated sonde depth to 0.000m from -0.005m with Conductivity of 0.26 mS/cm. 2008/07/30 14:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 14:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 14:28:17 Waterline: stopped at Sonde Depth: 0.002 Click Count: 78/ 72 Conductivity: 43.55 Current: 0.718 Waterline: Motor Off: 78 clicks/72, SndDpth:0.002m, buffer: 295, Cond:43.55mS/cm, Current: 0.72 amps. 2008/07/30 14:28:17 Waterline: Initial Sonde Depth 0.002m. Conductivity: 43.55mS/cm. Waterline: Launch count is 78 clicks down from home position. 2008/07/30 14:28:18 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 14:28:22 Waterline: Attempting to collect 60 depth samples. 2008/07/30 14:29:22 Success collecting 60 depth samples. 60 Sorted Depth Values: 164.0 167.0 179.0 179.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 Setting working depth from surface to: 228.0 cm. 2008/07/30 14:29:24 Waterline: Working Depth is 228.0, Target Depth is 153.0 2008/07/30 14:30:00 Beginning Cast Number 7 2008/07/30 14:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 14:30:01 Cast: lowering to 153.0 cm, or 275 clicks. 2008/07/30 14:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 14:30:46 Cast: Motor Off: 268 clicks/275, SndDpth:1.613m, buffer: 740, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 14:31:07 Cast: Reached the bottom of cast 7. After 268 clicks, depth at bottom is 200.4 cm. Cast: Target was 275 clicks or a final depth of 153.0 cm. Cast: Conductivity is:45.49 mS/cm. 2008/07/30 14:31:08 Retrieving sonde 402 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 14:31:08 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 14:32:08 Retrieve: HIGH current error of 1.642 amps (1.600 A) on click 346(state 3)! 2008/07/30 14:32:08 Retrieve: Motor Off: 346 clicks/402, SndDpth:0.112m, buffer: 619, Cond:43.26mS/cm, Current: 1.64 amps. 2008/07/30 14:32:10 Retrieve: Motor Off: 346 clicks/402, SndDpth:0.086m, buffer: 485, Cond:43.26mS/cm, Current: 1.64 amps. 2008/07/30 14:32:28 Docking: Sonde at surface after 346 of 268 expected clicks. 2008/07/30 14:32:30 Docking: Raising sonde 78 clicks from waterline to home position. 2008/07/30 14:32:30 Docking: Setting motor to raise and reseting click counter. 2008/07/30 14:32:31 Docking: HIGH current error of 5.428 amps (1.400 A) on click 2(state 0)! 2008/07/30 14:32:31 Docking: Motor Off: 2 clicks/78, SndDpth:0.002m, buffer: 285, Cond:0.56mS/cm, Current: 5.43 amps. 2008/07/30 14:32:32 Docking: Motor Off: 2 clicks/78, SndDpth:0.002m, buffer: 189, Cond:0.55mS/cm, Current: 5.43 amps. 2008/07/30 14:32:33 Docking: Home position after 2 more clicks. Max current was 1.596 A. 2008/07/30 14:32:37 Saved 3994 of 3994 bytes to file 20080730.dat. 2008/07/30 14:32:55 Stored 677 WIND samples to memory. Velocity: 5.706m/s (11.1 knots), Direction:184.1 Compass:175.5 North: -5.692 East: -0.403 2008/07/30 14:32:56 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 14:57:00 INIT: ------- Initiating Cast Number 8 on AVP1_SERDP . Bat at 13.7 Volts, Software Version: 1.44 ---------- 2008/07/30 14:57:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 14:57:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 14:57:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 14:57:32 Waterline: stopped at Sonde Depth: -0.001 Click Count: 80/ 73 Conductivity: 43.61 Current: 0.685 Waterline: Motor Off: 80 clicks/73, SndDpth:-0.001m, buffer: 296, Cond:43.61mS/cm, Current: 0.68 amps. 2008/07/30 14:57:32 Waterline: Initial Sonde Depth -0.001m. Conductivity: 43.61mS/cm. Waterline: Launch count is 80 clicks down from home position. 2008/07/30 14:57:32 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 14:57:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 14:58:37 Success collecting 60 depth samples. 60 Sorted Depth Values: 219.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 222.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 225.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 Setting working depth from surface to: 228.0 cm. 2008/07/30 14:58:39 Waterline: Working Depth is 228.0, Target Depth is 153.0 2008/07/30 15:00:00 Beginning Cast Number 8 2008/07/30 15:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 15:00:00 Cast: lowering to 153.0 cm, or 275 clicks. 2008/07/30 15:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 15:00:46 Cast: Motor Off: 276 clicks/275, SndDpth:1.549m, buffer: 763, Cond:99.99mS/cm, Current: 0.82 amps. 2008/07/30 15:01:19 Cast: Reached the bottom of cast 8. After 276 clicks, depth at bottom is 201.8 cm. Cast: Target was 275 clicks or a final depth of 153.0 cm. Cast: Conductivity is:45.59 mS/cm. 2008/07/30 15:01:19 Retrieving sonde 414 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 15:01:19 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 15:02:21 Retrieve: HIGH current error of 2.026 amps (1.600 A) on click 355(state 0)! 2008/07/30 15:02:21 Retrieve: Motor Off: 355 clicks/414, SndDpth:0.162m, buffer: 610, Cond:43.25mS/cm, Current: 2.03 amps. 2008/07/30 15:02:22 Retrieve: Motor Off: 355 clicks/414, SndDpth:0.125m, buffer: 559, Cond:43.25mS/cm, Current: 2.03 amps. 2008/07/30 15:02:41 Docking: Sonde at surface after 355 of 276 expected clicks. 2008/07/30 15:02:43 Docking: Raising sonde 80 clicks from waterline to home position. 2008/07/30 15:02:43 Docking: Setting motor to raise and reseting click counter. 2008/07/30 15:02:44 Docking: HIGH current error of 5.419 amps (1.400 A) on click 2(state 1)! 2008/07/30 15:02:45 Docking: Motor Off: 2 clicks/80, SndDpth:-0.006m, buffer: 284, Cond:0.51mS/cm, Current: 5.42 amps. 2008/07/30 15:02:46 Docking: Motor Off: 2 clicks/80, SndDpth:-0.006m, buffer: 152, Cond:0.51mS/cm, Current: 5.42 amps. 2008/07/30 15:02:46 Docking: Home position after 2 more clicks. Max current was 1.509 A. 2008/07/30 15:02:51 Saved 4068 of 4068 bytes to file 20080730.dat. 2008/07/30 15:03:10 Stored 705 WIND samples to memory. Velocity: 6.713m/s (13.0 knots), Direction:182.0 Compass:184.5 North: -6.709 East: -0.240 2008/07/30 15:03:10 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 15:27:00 INIT: ------- Initiating Cast Number 9 on AVP1_SERDP . Bat at 13.5 Volts, Software Version: 1.44 ---------- 2008/07/30 15:27:39 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.30 mS/cm. 2008/07/30 15:28:03 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 15:28:03 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 15:28:17 Waterline: stopped at Sonde Depth: 0.000 Click Count: 79/ 73 Conductivity: 43.80 Current: 0.704 Waterline: Motor Off: 79 clicks/73, SndDpth:0.000m, buffer: 296, Cond:43.80mS/cm, Current: 0.70 amps. 2008/07/30 15:28:17 Waterline: Initial Sonde Depth 0.000m. Conductivity: 43.80mS/cm. Waterline: Launch count is 79 clicks down from home position. 2008/07/30 15:28:17 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 15:28:22 Waterline: Attempting to collect 60 depth samples. 2008/07/30 15:29:22 Success collecting 60 depth samples. 60 Sorted Depth Values: 225.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 243.0 Setting working depth from surface to: 231.0 cm. 2008/07/30 15:29:24 Waterline: Working Depth is 231.0, Target Depth is 156.0 2008/07/30 15:30:00 Beginning Cast Number 9 2008/07/30 15:30:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 15:30:01 Cast: lowering to 156.0 cm, or 280 clicks. 2008/07/30 15:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 15:30:44 Cast: Motor Off: 263 clicks/280, SndDpth:1.561m, buffer: 740, Cond:99.99mS/cm, Current: 0.76 amps. 2008/07/30 15:31:06 Cast: Reached the bottom of cast 9. After 263 clicks, depth at bottom is 198.8 cm. Cast: Target was 280 clicks or a final depth of 156.0 cm. Cast: Conductivity is:45.48 mS/cm. 2008/07/30 15:31:06 Retrieving sonde 394 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 15:31:06 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 15:32:05 Retrieve: HIGH current error of 1.976 amps (1.600 A) on click 336(state 0)! 2008/07/30 15:32:05 Retrieve: Motor Off: 336 clicks/394, SndDpth:0.180m, buffer: 629, Cond:43.46mS/cm, Current: 1.98 amps. 2008/07/30 15:32:06 Retrieve: Motor Off: 336 clicks/394, SndDpth:0.147m, buffer: 485, Cond:43.46mS/cm, Current: 1.98 amps. 2008/07/30 15:32:24 Docking: Sonde at surface after 336 of 263 expected clicks. 2008/07/30 15:32:27 Docking: Raising sonde 79 clicks from waterline to home position. 2008/07/30 15:32:27 Docking: Setting motor to raise and reseting click counter. 2008/07/30 15:32:27 Docking: HIGH current error of 5.233 amps (1.400 A) on click 2(state 1)! 2008/07/30 15:32:28 Docking: Motor Off: 2 clicks/79, SndDpth:-0.002m, buffer: 282, Cond:0.57mS/cm, Current: 5.23 amps. 2008/07/30 15:32:29 Docking: Motor Off: 2 clicks/79, SndDpth:-0.003m, buffer: 189, Cond:0.56mS/cm, Current: 5.23 amps. 2008/07/30 15:32:29 Docking: Home position after 2 more clicks. Max current was 1.486 A. 2008/07/30 15:32:33 Saved 3920 of 3920 bytes to file 20080730.dat. 2008/07/30 15:32:51 Stored 670 WIND samples to memory. Velocity: 6.300m/s (12.2 knots), Direction:199.1 Compass:201.9 North: -5.952 East: -2.067 2008/07/30 15:32:52 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 15:57:00 INIT: ------- Initiating Cast Number 10 on AVP1_SERDP . Bat at 13.7 Volts, Software Version: 1.44 ---------- 2008/07/30 15:57:40 INIT: Calibrated sonde depth to 0.000m from 0.003m with Conductivity of 0.42 mS/cm. 2008/07/30 15:58:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 15:58:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 15:58:16 Waterline: stopped at Sonde Depth: -0.002 Click Count: 71/ 65 Conductivity: 44.28 Current: 0.653 Waterline: Motor Off: 71 clicks/65, SndDpth:-0.002m, buffer: 252, Cond:44.28mS/cm, Current: 0.65 amps. 2008/07/30 15:58:16 Waterline: Initial Sonde Depth -0.002m. Conductivity: 44.28mS/cm. Waterline: Launch count is 71 clicks down from home position. 2008/07/30 15:58:17 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 15:58:21 Waterline: Attempting to collect 60 depth samples. 2008/07/30 15:59:21 Success collecting 60 depth samples. 60 Sorted Depth Values: 228.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 246.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 15:59:23 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 16:00:00 Beginning Cast Number 10 2008/07/30 16:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 16:00:00 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 16:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 16:00:49 Cast: Motor Off: 296 clicks/291, SndDpth:1.636m, buffer: 814, Cond:99.99mS/cm, Current: 0.82 amps. 2008/07/30 16:01:13 Cast: Reached the bottom of cast 10. After 296 clicks, depth at bottom is 208.8 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:45.81 mS/cm. 2008/07/30 16:01:13 Retrieving sonde 444 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 16:01:14 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 16:02:17 Retrieve: HIGH current error of 1.773 amps (1.600 A) on click 365(state 0)! 2008/07/30 16:02:17 Retrieve: Motor Off: 365 clicks/444, SndDpth:0.135m, buffer: 650, Cond:43.95mS/cm, Current: 1.77 amps. 2008/07/30 16:02:18 Retrieve: Motor Off: 365 clicks/444, SndDpth:0.111m, buffer: 543, Cond:43.95mS/cm, Current: 1.77 amps. 2008/07/30 16:02:37 Docking: Sonde at surface after 365 of 296 expected clicks. 2008/07/30 16:02:39 Docking: Raising sonde 71 clicks from waterline to home position. 2008/07/30 16:02:39 Docking: Setting motor to raise and reseting click counter. 2008/07/30 16:02:40 Docking: HIGH current error of 5.130 amps (1.400 A) on click 2(state 1)! 2008/07/30 16:02:40 Docking: Motor Off: 2 clicks/71, SndDpth:-0.006m, buffer: 205, Cond:0.59mS/cm, Current: 5.13 amps. 2008/07/30 16:02:42 Docking: Motor Off: 2 clicks/71, SndDpth:-0.006m, buffer: 115, Cond:0.57mS/cm, Current: 5.13 amps. 2008/07/30 16:02:42 Docking: Home position after 2 more clicks. Max current was 1.552 A. 2008/07/30 16:02:46 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 16:03:06 Stored 697 WIND samples to memory. Velocity: 6.589m/s (12.8 knots), Direction:196.8 Compass:201.5 North: -6.307 East: -1.906 2008/07/30 16:03:06 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 16:03:06 Cast number 10. Time to re-home sonde then tune motor idle current. 2008/07/30 16:03:07 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 16:03:08 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.006m, buffer: 0, Cond:0.57mS/cm, Current: 0.66 amps. 2008/07/30 16:03:09 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 16:03:10 Re-Home: HIGH current error of 1.410 amps (1.400 A) on click 4(state 6)! 2008/07/30 16:03:10 Re-Home: Motor Off: 4 clicks/1000, SndDpth:-0.006m, buffer: 0, Cond:0.57mS/cm, Current: 1.41 amps. 2008/07/30 16:03:11 Re-Home: Raised 4 clicks. Variance of -3 clicks. 2008/07/30 16:03:12 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 16:03:12 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.006m, buffer: 0, Cond:0.57mS/cm, Current: 0.61 amps. 2008/07/30 16:03:13 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 16:03:13 Motor idle current changed from 224 to 240. 2008/07/30 16:27:00 INIT: ------- Initiating Cast Number 11 on AVP1_SERDP . Bat at 13.6 Volts, Software Version: 1.44 ---------- 2008/07/30 16:27:40 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.39 mS/cm. 2008/07/30 16:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 16:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 16:28:13 Waterline: stopped at Sonde Depth: 1.155 Click Count: 49/ 55 Conductivity: 0.43 Current: 0.642 Waterline: Motor Off: 49 clicks/55, SndDpth:1.155m, buffer: 222, Cond:0.43mS/cm, Current: 0.64 amps. 2008/07/30 16:28:13 Waterline: Initial Sonde Depth 1.155m. Conductivity: 0.43mS/cm. Waterline: Launch count is 49 clicks down from home position. 2008/07/30 16:28:13 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 16:28:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 16:29:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 16:29:20 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 16:30:00 Beginning Cast Number 11 2008/07/30 16:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 16:30:00 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 16:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 16:30:50 Cast: Motor Off: 298 clicks/291, SndDpth:1.497m, buffer: 859, Cond:99.99mS/cm, Current: 0.74 amps. 2008/07/30 16:31:14 Cast: Reached the bottom of cast 11. After 298 clicks, depth at bottom is 205.8 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:45.40 mS/cm. 2008/07/30 16:31:14 Retrieving sonde 447 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 16:31:15 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 16:32:15 Retrieve: HIGH current error of 1.674 amps (1.600 A) on click 348(state 1)! 2008/07/30 16:32:15 Retrieve: Motor Off: 348 clicks/447, SndDpth:0.166m, buffer: 641, Cond:44.66mS/cm, Current: 1.67 amps. 2008/07/30 16:32:16 Retrieve: Motor Off: 348 clicks/447, SndDpth:0.131m, buffer: 515, Cond:44.66mS/cm, Current: 1.67 amps. 2008/07/30 16:32:35 Docking: Sonde at surface after 348 of 298 expected clicks. 2008/07/30 16:32:37 Docking: Raising sonde 49 clicks from waterline to home position. 2008/07/30 16:32:37 Docking: Setting motor to raise and reseting click counter. 2008/07/30 16:32:38 Docking: HIGH current error of 5.295 amps (1.400 A) on click 2(state 0)! 2008/07/30 16:32:38 Docking: Motor Off: 2 clicks/49, SndDpth:-0.002m, buffer: 170, Cond:0.55mS/cm, Current: 5.30 amps. 2008/07/30 16:32:40 Docking: Motor Off: 2 clicks/49, SndDpth:-0.002m, buffer: 115, Cond:0.54mS/cm, Current: 5.30 amps. 2008/07/30 16:32:40 Docking: Home position after 2 more clicks. Max current was 1.498 A. 2008/07/30 16:32:44 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 16:33:03 Stored 692 WIND samples to memory. Velocity: 7.599m/s (14.7 knots), Direction:201.1 Compass:198.5 North: -7.088 East: -2.739 2008/07/30 16:33:03 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 16:57:00 INIT: ------- Initiating Cast Number 12 on AVP1_SERDP . Bat at 13.7 Volts, Software Version: 1.44 ---------- 2008/07/30 16:57:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 16:57:21 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 16:57:21 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 16:57:34 Waterline: stopped at Sonde Depth: 0.003 Click Count: 78/ 71 Conductivity: 45.80 Current: 0.717 Waterline: Motor Off: 78 clicks/71, SndDpth:0.003m, buffer: 296, Cond:45.80mS/cm, Current: 0.72 amps. 2008/07/30 16:57:34 Waterline: Initial Sonde Depth 0.003m. Conductivity: 45.80mS/cm. Waterline: Launch count is 78 clicks down from home position. 2008/07/30 16:57:34 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 16:57:39 Waterline: Attempting to collect 60 depth samples. 2008/07/30 16:58:39 Success collecting 60 depth samples. 60 Sorted Depth Values: 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 231.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 249.0 Setting working depth from surface to: 237.0 cm. 2008/07/30 16:58:41 Waterline: Working Depth is 237.0, Target Depth is 162.0 2008/07/30 17:00:00 Beginning Cast Number 12 2008/07/30 17:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 17:00:00 Cast: lowering to 162.0 cm, or 291 clicks. 2008/07/30 17:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 17:00:50 Cast: Motor Off: 294 clicks/291, SndDpth:1.619m, buffer: 814, Cond:99.99mS/cm, Current: 0.85 amps. 2008/07/30 17:01:23 Cast: Reached the bottom of cast 12. After 294 clicks, depth at bottom is 211.2 cm. Cast: Target was 291 clicks or a final depth of 162.0 cm. Cast: Conductivity is:45.26 mS/cm. 2008/07/30 17:01:24 Retrieving sonde 441 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 17:01:24 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 17:02:28 Retrieve: HIGH current error of 1.681 amps (1.600 A) on click 367(state 2)! 2008/07/30 17:02:28 Retrieve: Motor Off: 367 clicks/441, SndDpth:0.069m, buffer: 575, Cond:45.24mS/cm, Current: 1.68 amps. 2008/07/30 17:02:30 Retrieve: Motor Off: 367 clicks/441, SndDpth:0.004m, buffer: 485, Cond:45.24mS/cm, Current: 1.68 amps. 2008/07/30 17:02:48 Docking: Sonde at surface after 367 of 294 expected clicks. 2008/07/30 17:02:50 Docking: Raising sonde 78 clicks from waterline to home position. 2008/07/30 17:02:50 Docking: Setting motor to raise and reseting click counter. 2008/07/30 17:02:51 Docking: HIGH current error of 4.554 amps (1.400 A) on click 2(state 0)! 2008/07/30 17:02:51 Docking: Motor Off: 2 clicks/78, SndDpth:-0.004m, buffer: 228, Cond:0.60mS/cm, Current: 4.55 amps. 2008/07/30 17:02:53 Docking: Motor Off: 2 clicks/78, SndDpth:-0.004m, buffer: 189, Cond:0.58mS/cm, Current: 4.55 amps. 2008/07/30 17:02:53 Docking: Home position after 2 more clicks. Max current was 1.539 A. 2008/07/30 17:02:58 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 17:03:17 Stored 719 WIND samples to memory. Velocity: 7.202m/s (14.0 knots), Direction:204.0 Compass:195.7 North: -6.580 East: -2.927 2008/07/30 17:03:17 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 17:27:00 INIT: ------- Initiating Cast Number 13 on AVP1_SERDP . Bat at 13.3 Volts, Software Version: 1.44 ---------- 2008/07/30 17:27:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 17:27:20 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 17:27:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 17:27:33 Waterline: stopped at Sonde Depth: -0.001 Click Count: 73/ 68 Conductivity: 46.38 Current: 0.724 Waterline: Motor Off: 73 clicks/68, SndDpth:-0.001m, buffer: 222, Cond:46.38mS/cm, Current: 0.72 amps. 2008/07/30 17:27:33 Waterline: Initial Sonde Depth -0.001m. Conductivity: 46.38mS/cm. Waterline: Launch count is 73 clicks down from home position. 2008/07/30 17:27:34 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 17:27:38 Waterline: Attempting to collect 60 depth samples. 2008/07/30 17:28:39 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 17:28:41 ABNORMAL DEPTH: Increasing maxDepthCM from 250 cm to 290 cm. 2008/07/30 17:28:41 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 17:30:00 Beginning Cast Number 13 2008/07/30 17:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 17:30:00 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 17:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 17:30:48 Cast: Motor Off: 280 clicks/297, SndDpth:1.739m, buffer: 666, Cond:99.99mS/cm, Current: 0.73 amps. 2008/07/30 17:31:19 Cast: Reached the bottom of cast 13. After 280 clicks, depth at bottom is 203.3 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:46.11 mS/cm. 2008/07/30 17:31:20 Retrieving sonde 420 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 17:31:20 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 17:32:24 Retrieve: (WL) HIGH current error of 1.617 amps (1.600 A) on click 352(state 2)! 2008/07/30 17:32:24 Retrieve: (WL) Motor Off: 352 clicks/420, SndDpth:0.022m, buffer: 370, Cond:46.15mS/cm, Current: 1.62 amps. 2008/07/30 17:32:24 Retrieve: (WL) Motor Off: 352 clicks/420, SndDpth:0.022m, buffer: 400, Cond:46.14mS/cm, Current: 1.62 amps. 2008/07/30 17:32:42 Docking: Sonde at surface after 352 of 280 expected clicks. 2008/07/30 17:32:44 Docking: Raising sonde 73 clicks from waterline to home position. 2008/07/30 17:32:44 Docking: Setting motor to raise and reseting click counter. 2008/07/30 17:32:45 Docking: HIGH current error of 3.913 amps (1.400 A) on click 2(state 1)! 2008/07/30 17:32:45 Docking: Motor Off: 2 clicks/73, SndDpth:-0.008m, buffer: 205, Cond:0.61mS/cm, Current: 3.91 amps. 2008/07/30 17:32:46 Docking: Motor Off: 2 clicks/73, SndDpth:-0.008m, buffer: 115, Cond:0.60mS/cm, Current: 3.91 amps. 2008/07/30 17:32:47 Docking: Home position after 2 more clicks. Max current was 1.571 A. 2008/07/30 17:32:51 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 17:33:09 Stored 705 WIND samples to memory. Velocity: 6.854m/s (13.3 knots), Direction:198.7 Compass:194.1 North: -6.494 East: -2.192 2008/07/30 17:33:10 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 17:57:00 INIT: ------- Initiating Cast Number 14 on AVP1_SERDP . Bat at 13.1 Volts, Software Version: 1.44 ---------- 2008/07/30 17:57:40 INIT: Calibrated sonde depth to 0.000m from -0.004m with Conductivity of 0.28 mS/cm. 2008/07/30 17:58:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 17:58:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 17:58:17 Waterline: stopped at Sonde Depth: 0.000 Click Count: 70/ 66 Conductivity: 47.60 Current: 0.649 Waterline: Motor Off: 70 clicks/66, SndDpth:0.000m, buffer: 222, Cond:47.60mS/cm, Current: 0.65 amps. 2008/07/30 17:58:17 Waterline: Initial Sonde Depth 0.000m. Conductivity: 47.60mS/cm. Waterline: Launch count is 70 clicks down from home position. 2008/07/30 17:58:17 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 17:58:22 Waterline: Attempting to collect 60 depth samples. 2008/07/30 17:59:22 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 234.0 234.0 234.0 234.0 234.0 234.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 252.0 252.0 256.0 259.0 259.0 Setting working depth from surface to: 240.0 cm. 2008/07/30 17:59:24 Waterline: Working Depth is 240.0, Target Depth is 165.0 2008/07/30 18:00:00 Beginning Cast Number 14 2008/07/30 18:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 18:00:00 Cast: lowering to 165.0 cm, or 297 clicks. 2008/07/30 18:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 18:00:47 Cast: Motor Off: 269 clicks/297, SndDpth:1.709m, buffer: 548, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 18:01:08 Cast: Reached the bottom of cast 14. After 269 clicks, depth at bottom is 197.6 cm. Cast: Target was 297 clicks or a final depth of 165.0 cm. Cast: Conductivity is:46.91 mS/cm. 2008/07/30 18:01:08 Retrieving sonde 403 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 18:01:08 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 18:02:10 Retrieve: (WL) HIGH current error of 1.958 amps (1.600 A) on click 338(state 0)! 2008/07/30 18:02:10 Retrieve: (WL) Motor Off: 338 clicks/403, SndDpth:0.029m, buffer: 285, Cond:14.12mS/cm, Current: 1.96 amps. 2008/07/30 18:02:12 Retrieve: (WL) Motor Off: 338 clicks/403, SndDpth:0.022m, buffer: 189, Cond:1.81mS/cm, Current: 1.96 amps. 2008/07/30 18:02:27 Docking: Sonde at surface after 338 of 269 expected clicks. 2008/07/30 18:02:30 Docking: Raising sonde 70 clicks from waterline to home position. 2008/07/30 18:02:30 Docking: Setting motor to raise and reseting click counter. 2008/07/30 18:02:31 Docking: HIGH current error of 5.168 amps (1.400 A) on click 2(state 1)! 2008/07/30 18:02:31 Docking: Motor Off: 2 clicks/70, SndDpth:-0.003m, buffer: 314, Cond:0.62mS/cm, Current: 5.17 amps. 2008/07/30 18:02:32 Docking: Motor Off: 2 clicks/70, SndDpth:-0.003m, buffer: 189, Cond:0.61mS/cm, Current: 5.17 amps. 2008/07/30 18:02:32 Docking: Home position after 2 more clicks. Max current was 1.491 A. 2008/07/30 18:02:37 Saved 4068 of 4068 bytes to file 20080730.dat. 2008/07/30 18:02:55 Stored 678 WIND samples to memory. Velocity: 6.255m/s (12.1 knots), Direction:208.7 Compass:191.7 North: -5.486 East: -3.006 2008/07/30 18:02:56 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 18:27:00 INIT: ------- Initiating Cast Number 15 on AVP1_SERDP . Bat at 12.9 Volts, Software Version: 1.44 ---------- 2008/07/30 18:27:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 18:27:20 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 18:27:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 18:27:32 Waterline: stopped at Sonde Depth: 0.000 Click Count: 68/ 64 Conductivity: 47.66 Current: 0.741 Waterline: Motor Off: 68 clicks/64, SndDpth:0.000m, buffer: 222, Cond:47.66mS/cm, Current: 0.74 amps. 2008/07/30 18:27:33 Waterline: Initial Sonde Depth 0.000m. Conductivity: 47.66mS/cm. Waterline: Launch count is 68 clicks down from home position. 2008/07/30 18:27:33 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 18:27:37 Waterline: Attempting to collect 60 depth samples. 2008/07/30 18:28:38 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 252.0 256.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 18:28:40 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 18:30:00 Beginning Cast Number 15 2008/07/30 18:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 18:30:00 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 18:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 18:30:53 Cast: Motor Off: 297 clicks/307, SndDpth:1.743m, buffer: 548, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 18:31:25 Cast: Reached the bottom of cast 15. After 297 clicks, depth at bottom is 211.0 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:47.07 mS/cm. 2008/07/30 18:31:26 Retrieving sonde 445 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 18:31:26 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 18:32:32 Retrieve: (WL) Motor Off: 360 clicks/445, SndDpth:0.031m, buffer: 222, Cond:1.51mS/cm, Current: 0.94 amps. 2008/07/30 18:32:49 Docking: Sonde at surface after 360 of 297 expected clicks. 2008/07/30 18:32:51 Docking: Raising sonde 68 clicks from waterline to home position. 2008/07/30 18:32:51 Docking: Setting motor to raise and reseting click counter. 2008/07/30 18:32:52 Docking: HIGH current error of 1.665 amps (1.400 A) on click 4(state 1)! 2008/07/30 18:32:52 Docking: Motor Off: 4 clicks/68, SndDpth:-0.001m, buffer: 244, Cond:0.63mS/cm, Current: 1.66 amps. 2008/07/30 18:32:54 Docking: Motor Off: 4 clicks/68, SndDpth:-0.001m, buffer: 115, Cond:0.61mS/cm, Current: 1.66 amps. 2008/07/30 18:32:54 Docking: Home position after 4 more clicks. Max current was 1.594 A. 2008/07/30 18:32:58 Saved 4512 of 4512 bytes to file 20080730.dat. 2008/07/30 18:33:17 Stored 720 WIND samples to memory. Velocity: 6.692m/s (13.0 knots), Direction:208.6 Compass:195.4 North: -5.873 East: -3.207 2008/07/30 18:33:18 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 18:33:18 Cast number 15. Time to re-home sonde then tune motor idle current. 2008/07/30 18:33:18 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 18:33:20 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.001m, buffer: 0, Cond:0.61mS/cm, Current: 0.66 amps. 2008/07/30 18:33:21 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 18:33:22 Re-Home: HIGH current error of 1.992 amps (1.400 A) on click 5(state 0)! 2008/07/30 18:33:22 Re-Home: Motor Off: 5 clicks/1000, SndDpth:-0.001m, buffer: 0, Cond:0.61mS/cm, Current: 1.99 amps. 2008/07/30 18:33:22 Re-Home: Raised 5 clicks. Variance of -2 clicks. 2008/07/30 18:33:24 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 18:33:24 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.001m, buffer: 0, Cond:0.61mS/cm, Current: 0.61 amps. 2008/07/30 18:33:25 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 18:33:25 Motor idle current changed from 240 to 224. 2008/07/30 18:57:00 INIT: ------- Initiating Cast Number 16 on AVP1_SERDP . Bat at 12.9 Volts, Software Version: 1.44 ---------- 2008/07/30 18:57:38 INIT: Calibrated sonde depth to 0.000m from 0.003m with Conductivity of 0.31 mS/cm. 2008/07/30 18:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 18:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 18:58:14 Waterline: stopped at Sonde Depth: 0.001 Click Count: 66/ 63 Conductivity: 47.94 Current: 0.759 Waterline: Motor Off: 66 clicks/63, SndDpth:0.001m, buffer: 178, Cond:47.94mS/cm, Current: 0.76 amps. 2008/07/30 18:58:14 Waterline: Initial Sonde Depth 0.001m. Conductivity: 47.94mS/cm. Waterline: Launch count is 66 clicks down from home position. 2008/07/30 18:58:14 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 18:58:19 Waterline: Attempting to collect 60 depth samples. 2008/07/30 18:59:19 Success collecting 60 depth samples. 60 Sorted Depth Values: 158.0 161.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 256.0 Setting working depth from surface to: 249.0 cm. 2008/07/30 18:59:21 Waterline: Working Depth is 249.0, Target Depth is 174.0 2008/07/30 19:00:00 Beginning Cast Number 16 2008/07/30 19:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 19:00:00 Cast: lowering to 174.0 cm, or 313 clicks. 2008/07/30 19:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 19:00:53 Cast: Motor Off: 292 clicks/313, SndDpth:1.752m, buffer: 444, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 19:01:14 Cast: Reached the bottom of cast 16. After 292 clicks, depth at bottom is 206.6 cm. Cast: Target was 313 clicks or a final depth of 174.0 cm. Cast: Conductivity is:47.78 mS/cm. 2008/07/30 19:01:14 Retrieving sonde 438 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 19:01:15 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 19:02:20 Retrieve: (WL) Motor Off: 349 clicks/438, SndDpth:0.030m, buffer: 148, Cond:1.48mS/cm, Current: 0.97 amps. 2008/07/30 19:02:36 Docking: Sonde at surface after 349 of 292 expected clicks. 2008/07/30 19:02:38 Docking: Raising sonde 66 clicks from waterline to home position. 2008/07/30 19:02:38 Docking: Setting motor to raise and reseting click counter. 2008/07/30 19:02:40 Docking: HIGH current error of 1.414 amps (1.400 A) on click 9(state 3)! 2008/07/30 19:02:40 Docking: Motor Off: 9 clicks/66, SndDpth:-0.003m, buffer: 222, Cond:0.62mS/cm, Current: 1.41 amps. 2008/07/30 19:02:41 Docking: Motor Off: 9 clicks/66, SndDpth:-0.003m, buffer: 222, Cond:0.62mS/cm, Current: 1.41 amps. 2008/07/30 19:02:41 Docking: Home position after 9 more clicks. Max current was 1.518 A. 2008/07/30 19:02:45 Saved 4438 of 4438 bytes to file 20080730.dat. 2008/07/30 19:03:04 Stored 693 WIND samples to memory. Velocity: 5.363m/s (10.4 knots), Direction:213.0 Compass:189.1 North: -4.496 East: -2.925 2008/07/30 19:03:04 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 19:27:00 INIT: ------- Initiating Cast Number 17 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 19:27:20 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 19:27:20 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 19:27:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 19:27:28 Waterline: stopped at Sonde Depth: 1.077 Click Count: 44/ 55 Conductivity: 0.31 Current: 0.660 Waterline: Motor Off: 44 clicks/55, SndDpth:1.077m, buffer: 148, Cond:0.31mS/cm, Current: 0.66 amps. 2008/07/30 19:27:29 Waterline: Initial Sonde Depth 1.077m. Conductivity: 0.31mS/cm. Waterline: Launch count is 44 clicks down from home position. 2008/07/30 19:27:29 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 19:27:33 Waterline: Attempting to collect 60 depth samples. 2008/07/30 19:28:34 Success collecting 60 depth samples. 60 Sorted Depth Values: 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 Setting working depth from surface to: 249.0 cm. 2008/07/30 19:28:36 Waterline: Working Depth is 249.0, Target Depth is 174.0 2008/07/30 19:30:00 Beginning Cast Number 17 2008/07/30 19:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 19:30:01 Cast: lowering to 174.0 cm, or 313 clicks. 2008/07/30 19:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 19:30:57 Cast: Motor Off: 314 clicks/313, SndDpth:1.751m, buffer: 472, Cond:99.99mS/cm, Current: 0.78 amps. 2008/07/30 19:31:30 Cast: Reached the bottom of cast 17. After 314 clicks, depth at bottom is 207.1 cm. Cast: Target was 313 clicks or a final depth of 174.0 cm. Cast: Conductivity is:47.87 mS/cm. 2008/07/30 19:31:31 Retrieving sonde 471 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 19:31:31 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 19:32:35 Retrieve: (WL) Motor Off: 341 clicks/471, SndDpth:0.050m, buffer: 74, Cond:29.11mS/cm, Current: 0.95 amps. 2008/07/30 19:32:39 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 19:32:54 Docking: Sonde at surface after 0 of 314 expected clicks. 2008/07/30 19:32:56 Docking: Raising sonde 44 clicks from waterline to home position. 2008/07/30 19:32:57 Docking: Setting motor to raise and reseting click counter. 2008/07/30 19:32:58 Docking: Motor Off: 344 clicks/44, SndDpth:0.001m, buffer: 222, Cond:0.66mS/cm, Current: 0.91 amps. 2008/07/30 19:32:58 Docking: Home position after 344 more clicks. Max current was 1.465 A. 2008/07/30 19:33:02 Saved 4734 of 4734 bytes to file 20080730.dat. 2008/07/30 19:33:21 Stored 726 WIND samples to memory. Velocity: 6.128m/s (11.9 knots), Direction:217.2 Compass:187.5 North: -4.882 East: -3.704 2008/07/30 19:33:22 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 19:57:00 INIT: ------- Initiating Cast Number 18 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 19:57:39 INIT: Calibrated sonde depth to 0.000m from 0.005m with Conductivity of 0.30 mS/cm. 2008/07/30 19:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 19:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 19:58:13 Waterline: stopped at Sonde Depth: 0.015 Click Count: 59/ 56 Conductivity: 48.02 Current: 0.722 Waterline: Motor Off: 59 clicks/56, SndDpth:0.015m, buffer: 148, Cond:48.02mS/cm, Current: 0.72 amps. 2008/07/30 19:58:13 Waterline: Initial Sonde Depth 0.015m. Conductivity: 48.02mS/cm. Waterline: Launch count is 59 clicks down from home position. 2008/07/30 19:58:14 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 19:58:18 Waterline: Attempting to collect 60 depth samples. 2008/07/30 19:59:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 252.0 Setting working depth from surface to: 249.0 cm. 2008/07/30 19:59:20 Waterline: Working Depth is 249.0, Target Depth is 174.0 2008/07/30 20:00:00 Beginning Cast Number 18 2008/07/30 20:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 20:00:00 Cast: lowering to 174.0 cm, or 313 clicks. 2008/07/30 20:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 20:00:52 Cast: Motor Off: 288 clicks/313, SndDpth:1.774m, buffer: 444, Cond:99.99mS/cm, Current: 0.74 amps. 2008/07/30 20:01:13 Cast: Reached the bottom of cast 18. After 288 clicks, depth at bottom is 207.1 cm. Cast: Target was 313 clicks or a final depth of 174.0 cm. Cast: Conductivity is:47.72 mS/cm. 2008/07/30 20:01:13 Retrieving sonde 432 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 20:01:13 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 20:02:16 Retrieve: (WL) Motor Off: 334 clicks/432, SndDpth:0.058m, buffer: 74, Cond:47.72mS/cm, Current: 0.88 amps. 2008/07/30 20:02:20 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 20:02:35 Docking: Sonde at surface after 0 of 288 expected clicks. 2008/07/30 20:02:38 Docking: Raising sonde 59 clicks from waterline to home position. 2008/07/30 20:02:38 Docking: Setting motor to raise and reseting click counter. 2008/07/30 20:02:39 Docking: Motor Off: 338 clicks/59, SndDpth:-0.001m, buffer: 222, Cond:0.68mS/cm, Current: 0.88 amps. 2008/07/30 20:02:39 Docking: Home position after 338 more clicks. Max current was 1.578 A. 2008/07/30 20:02:43 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 20:03:02 Stored 690 WIND samples to memory. Velocity: 5.188m/s (10.1 knots), Direction:223.8 Compass:185.1 North: -3.745 East: -3.590 2008/07/30 20:03:02 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 20:27:00 INIT: ------- Initiating Cast Number 19 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 20:27:41 INIT: Calibrated sonde depth to 0.000m from 0.010m with Conductivity of 0.49 mS/cm. 2008/07/30 20:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 20:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 20:28:14 Waterline: stopped at Sonde Depth: 0.018 Click Count: 53/ 57 Conductivity: 48.08 Current: 0.739 Waterline: Motor Off: 53 clicks/57, SndDpth:0.018m, buffer: 148, Cond:48.08mS/cm, Current: 0.74 amps. 2008/07/30 20:28:15 Waterline: Initial Sonde Depth 0.018m. Conductivity: 48.08mS/cm. Waterline: Launch count is 53 clicks down from home position. 2008/07/30 20:28:15 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 20:28:19 Waterline: Attempting to collect 60 depth samples. 2008/07/30 20:29:19 Success collecting 60 depth samples. 60 Sorted Depth Values: 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 252.0 252.0 252.0 252.0 256.0 256.0 256.0 259.0 259.0 262.0 262.0 265.0 265.0 Setting working depth from surface to: 249.0 cm. 2008/07/30 20:29:21 Waterline: Working Depth is 249.0, Target Depth is 174.0 2008/07/30 20:30:00 Beginning Cast Number 19 2008/07/30 20:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 20:30:01 Cast: lowering to 174.0 cm, or 313 clicks. 2008/07/30 20:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 20:30:51 Cast: Motor Off: 278 clicks/313, SndDpth:1.744m, buffer: 435, Cond:99.99mS/cm, Current: 0.72 amps. 2008/07/30 20:31:11 Cast: Reached the bottom of cast 19. After 278 clicks, depth at bottom is 204.1 cm. Cast: Target was 313 clicks or a final depth of 174.0 cm. Cast: Conductivity is:48.02 mS/cm. 2008/07/30 20:31:12 Retrieving sonde 417 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 20:31:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 20:32:15 Retrieve: (WL) Motor Off: 333 clicks/417, SndDpth:0.057m, buffer: 74, Cond:48.02mS/cm, Current: 0.92 amps. 2008/07/30 20:32:19 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 20:32:34 Docking: Sonde at surface after 0 of 278 expected clicks. 2008/07/30 20:32:36 Docking: Raising sonde 53 clicks from waterline to home position. 2008/07/30 20:32:36 Docking: Setting motor to raise and reseting click counter. 2008/07/30 20:32:37 Docking: Motor Off: 336 clicks/53, SndDpth:0.004m, buffer: 222, Cond:0.62mS/cm, Current: 0.92 amps. 2008/07/30 20:32:37 Docking: Home position after 336 more clicks. Max current was 1.590 A. 2008/07/30 20:32:42 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 20:33:00 Stored 687 WIND samples to memory. Velocity: 7.116m/s (13.8 knots), Direction:258.6 Compass:165.4 North: -1.408 East: -6.975 2008/07/30 20:33:01 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 20:57:00 INIT: ------- Initiating Cast Number 20 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 20:57:41 INIT: Calibrated sonde depth to 0.000m from 0.009m with Conductivity of 0.52 mS/cm. 2008/07/30 20:58:05 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 20:58:05 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 20:58:16 Waterline: stopped at Sonde Depth: 0.024 Click Count: 59/ 56 Conductivity: 48.55 Current: 0.688 Waterline: Motor Off: 59 clicks/56, SndDpth:0.024m, buffer: 148, Cond:48.55mS/cm, Current: 0.69 amps. 2008/07/30 20:58:16 Waterline: Initial Sonde Depth 0.024m. Conductivity: 48.55mS/cm. Waterline: Launch count is 59 clicks down from home position. 2008/07/30 20:58:16 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 20:58:21 Waterline: Attempting to collect 60 depth samples. 2008/07/30 20:59:21 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 237.0 237.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 256.0 256.0 256.0 256.0 256.0 256.0 256.0 259.0 259.0 259.0 259.0 259.0 262.0 262.0 262.0 265.0 265.0 268.0 Setting working depth from surface to: 252.0 cm. 2008/07/30 20:59:23 Waterline: Working Depth is 252.0, Target Depth is 177.0 2008/07/30 21:00:01 Beginning Cast Number 20 2008/07/30 21:00:01 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 21:00:01 Cast: lowering to 177.0 cm, or 318 clicks. 2008/07/30 21:00:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 21:00:51 Cast: Motor Off: 279 clicks/318, SndDpth:1.849m, buffer: 444, Cond:99.99mS/cm, Current: 0.72 amps. 2008/07/30 21:01:11 Cast: Reached the bottom of cast 20. After 279 clicks, depth at bottom is 209.2 cm. Cast: Target was 318 clicks or a final depth of 177.0 cm. Cast: Conductivity is:48.25 mS/cm. 2008/07/30 21:01:12 Retrieving sonde 418 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 21:01:12 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 21:02:15 Retrieve: (WL) Motor Off: 334 clicks/418, SndDpth:0.027m, buffer: 74, Cond:48.24mS/cm, Current: 1.01 amps. 2008/07/30 21:02:19 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 21:02:34 Docking: Sonde at surface after 0 of 279 expected clicks. 2008/07/30 21:02:36 Docking: Raising sonde 59 clicks from waterline to home position. 2008/07/30 21:02:36 Docking: Setting motor to raise and reseting click counter. 2008/07/30 21:02:37 Docking: Motor Off: 338 clicks/59, SndDpth:-0.001m, buffer: 222, Cond:0.87mS/cm, Current: 0.92 amps. 2008/07/30 21:02:38 Docking: Home position after 338 more clicks. Max current was 1.583 A. 2008/07/30 21:02:42 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 21:03:00 Stored 687 WIND samples to memory. Velocity: 8.955m/s (17.4 knots), Direction:265.2 Compass:155.0 North: -0.746 East: -8.924 2008/07/30 21:03:01 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 21:03:01 Cast number 20. Time to re-home sonde then tune motor idle current. 2008/07/30 21:03:01 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 21:03:03 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.001m, buffer: 0, Cond:0.87mS/cm, Current: 0.69 amps. 2008/07/30 21:03:04 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 21:03:08 Re-Home: HIGH current error of 1.415 amps (1.400 A) on click 22(state 6)! 2008/07/30 21:03:08 Re-Home: Motor Off: 22 clicks/1000, SndDpth:-0.001m, buffer: 0, Cond:0.87mS/cm, Current: 1.42 amps. 2008/07/30 21:03:09 Re-Home: Raised 22 clicks. Variance of 15 clicks. 2008/07/30 21:03:10 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 21:03:11 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.001m, buffer: 0, Cond:0.87mS/cm, Current: 0.67 amps. 2008/07/30 21:03:11 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 21:03:11 Motor idle current changed from 224 to 208. 2008/07/30 21:27:00 INIT: ------- Initiating Cast Number 21 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 21:27:19 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 21:27:19 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 21:27:20 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 21:27:27 Waterline: stopped at Sonde Depth: 1.802 Click Count: 40/ 55 Conductivity: 0.93 Current: 0.651 Waterline: Motor Off: 40 clicks/55, SndDpth:1.802m, buffer: 148, Cond:0.93mS/cm, Current: 0.65 amps. 2008/07/30 21:27:28 Waterline: Initial Sonde Depth 1.802m. Conductivity: 0.93mS/cm. Waterline: Launch count is 40 clicks down from home position. 2008/07/30 21:27:28 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 21:27:32 Waterline: Attempting to collect 60 depth samples. 2008/07/30 21:28:32 Success collecting 60 depth samples. 60 Sorted Depth Values: 234.0 237.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 252.0 256.0 256.0 256.0 259.0 259.0 262.0 265.0 265.0 268.0 Setting working depth from surface to: 252.0 cm. 2008/07/30 21:28:34 Waterline: Working Depth is 252.0, Target Depth is 177.0 2008/07/30 21:30:00 Beginning Cast Number 21 2008/07/30 21:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 21:30:00 Cast: lowering to 177.0 cm, or 318 clicks. 2008/07/30 21:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 21:30:18 Cast: Reached the bottom of cast 21. After 0 clicks, depth at bottom is 0.0 cm. Cast: Target was 318 clicks or a final depth of 177.0 cm. Cast: Conductivity is:48.27 mS/cm. 2008/07/30 21:30:19 Retrieving sonde 418 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 21:30:19 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 21:30:26 Retrieve: Motor Off: 34 clicks/418, SndDpth:-0.001m, buffer: 111, Cond:1.47mS/cm, Current: 0.91 amps. 2008/07/30 21:30:41 Docking: Sonde at surface after 34 of 279 expected clicks. 2008/07/30 21:30:43 Docking: Raising sonde 40 clicks from waterline to home position. 2008/07/30 21:30:43 Docking: Setting motor to raise and reseting click counter. 2008/07/30 21:30:45 Docking: HIGH current error of 1.500 amps (1.400 A) on click 8(state 1)! 2008/07/30 21:30:45 Docking: Motor Off: 8 clicks/40, SndDpth:-0.004m, buffer: 255, Cond:0.69mS/cm, Current: 1.50 amps. 2008/07/30 21:30:47 Docking: Motor Off: 8 clicks/40, SndDpth:-0.004m, buffer: 115, Cond:0.69mS/cm, Current: 1.50 amps. 2008/07/30 21:30:47 Docking: Home position after 8 more clicks. Max current was 1.353 A. 2008/07/30 21:30:51 Saved 220 of 220 bytes to file 20080730.dat. 2008/07/30 21:30:58 Stored 454 WIND samples to memory. Velocity: 9.878m/s (19.2 knots), Direction:259.5 Compass:154.1 North: -1.793 East: -9.714 2008/07/30 21:30:58 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 21:57:00 INIT: ------- Initiating Cast Number 22 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 21:57:41 INIT: Calibrated sonde depth to 0.000m from -0.007m with Conductivity of 0.32 mS/cm. 2008/07/30 21:58:05 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 21:58:05 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 21:58:17 Waterline: stopped at Sonde Depth: -0.004 Click Count: 64/ 61 Conductivity: 48.54 Current: 0.681 Waterline: Motor Off: 64 clicks/61, SndDpth:-0.004m, buffer: 148, Cond:48.54mS/cm, Current: 0.68 amps. 2008/07/30 21:58:17 Waterline: Initial Sonde Depth -0.004m. Conductivity: 48.54mS/cm. Waterline: Launch count is 64 clicks down from home position. 2008/07/30 21:58:17 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 21:58:22 Waterline: Attempting to collect 60 depth samples. 2008/07/30 21:59:22 Success collecting 60 depth samples. 60 Sorted Depth Values: 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 249.0 252.0 252.0 259.0 Setting working depth from surface to: 249.0 cm. 2008/07/30 21:59:24 Waterline: Working Depth is 249.0, Target Depth is 174.0 2008/07/30 22:00:00 Beginning Cast Number 22 2008/07/30 22:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 22:00:00 Cast: lowering to 174.0 cm, or 313 clicks. 2008/07/30 22:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 22:00:53 Cast: Motor Off: 289 clicks/313, SndDpth:1.757m, buffer: 400, Cond:99.99mS/cm, Current: 0.77 amps. 2008/07/30 22:01:12 Cast: Reached the bottom of cast 22. After 289 clicks, depth at bottom is 204.8 cm. Cast: Target was 313 clicks or a final depth of 174.0 cm. Cast: Conductivity is:48.01 mS/cm. 2008/07/30 22:01:13 Retrieving sonde 433 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 22:01:13 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 22:02:14 Retrieve: (WL) Motor Off: 320 clicks/433, SndDpth:0.044m, buffer: 74, Cond:47.93mS/cm, Current: 1.01 amps. 2008/07/30 22:02:18 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 22:02:22 Retrieve: (WL) Motor Off: 339 clicks/433, SndDpth:0.004m, buffer: 125, Cond:1.96mS/cm, Current: 0.94 amps. 2008/07/30 22:02:37 Docking: Sonde at surface after 339 of 289 expected clicks. 2008/07/30 22:02:40 Docking: Raising sonde 64 clicks from waterline to home position. 2008/07/30 22:02:40 Docking: Setting motor to raise and reseting click counter. 2008/07/30 22:02:42 Docking: HIGH current error of 1.484 amps (1.400 A) on click 13(state 1)! 2008/07/30 22:02:43 Docking: Motor Off: 13 clicks/64, SndDpth:-0.001m, buffer: 190, Cond:0.64mS/cm, Current: 1.48 amps. 2008/07/30 22:02:44 Docking: Motor Off: 13 clicks/64, SndDpth:-0.001m, buffer: 115, Cond:0.64mS/cm, Current: 1.48 amps. 2008/07/30 22:02:44 Docking: Home position after 13 more clicks. Max current was 1.578 A. 2008/07/30 22:02:49 Saved 4364 of 4364 bytes to file 20080730.dat. 2008/07/30 22:03:09 Stored 703 WIND samples to memory. Velocity: 7.064m/s (13.7 knots), Direction:254.6 Compass:154.8 North: -1.875 East: -6.810 2008/07/30 22:03:09 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 22:27:00 INIT: ------- Initiating Cast Number 23 on AVP1_SERDP . Bat at 12.7 Volts, Software Version: 1.44 ---------- 2008/07/30 22:27:18 INIT: Sonde depth within ± 2mm tolerance, no calibration performed. 2008/07/30 22:27:18 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 22:27:18 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 22:27:30 Waterline: stopped at Sonde Depth: -0.002 Click Count: 63/ 61 Conductivity: 48.13 Current: 0.692 Waterline: Motor Off: 63 clicks/61, SndDpth:-0.002m, buffer: 148, Cond:48.13mS/cm, Current: 0.69 amps. 2008/07/30 22:27:30 Waterline: Initial Sonde Depth -0.002m. Conductivity: 48.13mS/cm. Waterline: Launch count is 63 clicks down from home position. 2008/07/30 22:27:31 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 22:27:35 Waterline: Attempting to collect 60 depth samples. 2008/07/30 22:28:35 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 252.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 22:28:37 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 22:30:00 Beginning Cast Number 23 2008/07/30 22:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 22:30:00 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 22:30:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 22:30:51 Cast: Motor Off: 280 clicks/307, SndDpth:1.727m, buffer: 370, Cond:99.99mS/cm, Current: 0.80 amps. 2008/07/30 22:31:22 Cast: Reached the bottom of cast 23. After 280 clicks, depth at bottom is 197.9 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:47.94 mS/cm. 2008/07/30 22:31:22 Retrieving sonde 420 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 22:31:22 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 22:32:23 Retrieve: (WL) Motor Off: 320 clicks/420, SndDpth:0.050m, buffer: 74, Cond:47.86mS/cm, Current: 1.07 amps. 2008/07/30 22:32:27 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 22:32:42 Docking: Sonde at surface after 0 of 280 expected clicks. 2008/07/30 22:32:44 Docking: Raising sonde 63 clicks from waterline to home position. 2008/07/30 22:32:45 Docking: Setting motor to raise and reseting click counter. 2008/07/30 22:32:45 Docking: Motor Off: 323 clicks/63, SndDpth:-0.004m, buffer: 222, Cond:0.99mS/cm, Current: 1.02 amps. 2008/07/30 22:32:46 Docking: Home position after 323 more clicks. Max current was 1.504 A. 2008/07/30 22:32:50 Saved 4216 of 4216 bytes to file 20080730.dat. 2008/07/30 22:33:08 Stored 702 WIND samples to memory. Velocity: 6.204m/s (12.0 knots), Direction:256.6 Compass:155.3 North: -1.440 East: -6.034 2008/07/30 22:33:09 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 22:57:00 INIT: ------- Initiating Cast Number 24 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 22:57:38 INIT: Calibrated sonde depth to 0.000m from -0.007m with Conductivity of 0.28 mS/cm. 2008/07/30 22:58:02 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 22:58:02 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 22:58:12 Waterline: stopped at Sonde Depth: 0.024 Click Count: 57/ 61 Conductivity: 47.79 Current: 0.727 Waterline: Motor Off: 57 clicks/61, SndDpth:0.024m, buffer: 148, Cond:47.79mS/cm, Current: 0.73 amps. 2008/07/30 22:58:13 Waterline: Initial Sonde Depth 0.024m. Conductivity: 47.79mS/cm. Waterline: Launch count is 57 clicks down from home position. 2008/07/30 22:58:13 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 22:58:17 Waterline: Attempting to collect 60 depth samples. 2008/07/30 22:59:18 Success collecting 60 depth samples. 60 Sorted Depth Values: 237.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 259.0 262.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 22:59:20 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 23:00:00 Beginning Cast Number 24 2008/07/30 23:00:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 23:00:00 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 23:00:00 Cast: Setting motor to lower and reseting click counter. 2008/07/30 23:00:49 Cast: Motor Off: 270 clicks/307, SndDpth:1.721m, buffer: 370, Cond:99.99mS/cm, Current: 0.79 amps. 2008/07/30 23:01:09 Cast: Reached the bottom of cast 24. After 270 clicks, depth at bottom is 199.4 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:47.73 mS/cm. 2008/07/30 23:01:10 Retrieving sonde 405 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 23:01:10 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 23:02:12 Retrieve: (WL) Motor Off: 326 clicks/405, SndDpth:0.051m, buffer: 74, Cond:3.07mS/cm, Current: 0.92 amps. 2008/07/30 23:02:16 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 23:02:31 Docking: Sonde at surface after 0 of 270 expected clicks. 2008/07/30 23:02:33 Docking: Raising sonde 57 clicks from waterline to home position. 2008/07/30 23:02:33 Docking: Setting motor to raise and reseting click counter. 2008/07/30 23:02:34 Docking: Motor Off: 330 clicks/57, SndDpth:-0.005m, buffer: 222, Cond:0.59mS/cm, Current: 0.93 amps. 2008/07/30 23:02:35 Docking: Home position after 330 more clicks. Max current was 1.587 A. 2008/07/30 23:02:39 Saved 4142 of 4142 bytes to file 20080730.dat. 2008/07/30 23:02:57 Stored 682 WIND samples to memory. Velocity: 4.637m/s (9.0 knots), Direction:250.3 Compass:155.4 North: -1.562 East: -4.366 2008/07/30 23:02:58 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 23:27:00 INIT: ------- Initiating Cast Number 25 on AVP1_SERDP . Bat at 12.8 Volts, Software Version: 1.44 ---------- 2008/07/30 23:27:40 INIT: Calibrated sonde depth to 0.000m from -0.007m with Conductivity of 0.29 mS/cm. 2008/07/30 23:28:04 Waterline: Lowering sonde from home position to waterline until sonde depth exceeds0.009m or 55 clicks. 2008/07/30 23:28:04 Waterline: Setting motor to lower and reseting click counter. 2008/07/30 23:28:15 Waterline: stopped at Sonde Depth: 0.019 Click Count: 58/ 61 Conductivity: 47.48 Current: 0.741 Waterline: Motor Off: 58 clicks/61, SndDpth:0.019m, buffer: 148, Cond:47.48mS/cm, Current: 0.74 amps. 2008/07/30 23:28:15 Waterline: Initial Sonde Depth 0.019m. Conductivity: 47.48mS/cm. Waterline: Launch count is 58 clicks down from home position. 2008/07/30 23:28:16 Waterline: Initiating Sensor Cleaning Cycle. 2008/07/30 23:28:20 Waterline: Attempting to collect 60 depth samples. 2008/07/30 23:29:20 Success collecting 60 depth samples. 60 Sorted Depth Values: 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 240.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 243.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 246.0 249.0 249.0 249.0 Setting working depth from surface to: 246.0 cm. 2008/07/30 23:29:22 Waterline: Working Depth is 246.0, Target Depth is 171.0 2008/07/30 23:30:00 Beginning Cast Number 25 2008/07/30 23:30:00 Cast: Depth Margin: 50 cm, at 1.80 clicks per CM 2008/07/30 23:30:01 Cast: lowering to 171.0 cm, or 307 clicks. 2008/07/30 23:30:01 Cast: Setting motor to lower and reseting click counter. 2008/07/30 23:30:50 Cast: Motor Off: 270 clicks/307, SndDpth:1.717m, buffer: 370, Cond:99.99mS/cm, Current: 0.76 amps. 2008/07/30 23:31:09 Cast: Reached the bottom of cast 25. After 270 clicks, depth at bottom is 198.0 cm. Cast: Target was 307 clicks or a final depth of 171.0 cm. Cast: Conductivity is:47.54 mS/cm. 2008/07/30 23:31:09 Retrieving sonde 405 clicks or until surface detected by pressure/conductivity (or overcurrent). 2008/07/30 23:31:10 Retrieve: Setting motor to raise and reseting click counter. 2008/07/30 23:32:10 Retrieve: (WL) Motor Off: 321 clicks/405, SndDpth:0.029m, buffer: 75, Cond:23.43mS/cm, Current: 0.95 amps. 2008/07/30 23:32:14 Retrieve: (WL) Setting motor to raise and reseting click counter. 2008/07/30 23:32:30 Docking: Sonde at surface after 0 of 270 expected clicks. 2008/07/30 23:32:32 Docking: Raising sonde 58 clicks from waterline to home position. 2008/07/30 23:32:32 Docking: Setting motor to raise and reseting click counter. 2008/07/30 23:32:33 Docking: Motor Off: 324 clicks/58, SndDpth:-0.006m, buffer: 222, Cond:1.15mS/cm, Current: 0.90 amps. 2008/07/30 23:32:33 Docking: Home position after 324 more clicks. Max current was 1.599 A. 2008/07/30 23:32:38 Saved 4068 of 4068 bytes to file 20080730.dat. 2008/07/30 23:32:56 Stored 678 WIND samples to memory. Velocity: 4.312m/s (8.4 knots), Direction:225.6 Compass:160.3 North: -3.020 East: -3.078 2008/07/30 23:32:56 Saved 66 of 66 bytes to file 20080730.wnd. 2008/07/30 23:32:56 Cast number 25. Time to re-home sonde then tune motor idle current. 2008/07/30 23:32:57 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 23:32:58 Re-Home: Motor Off: 5 clicks/ 5, SndDpth:-0.006m, buffer: 0, Cond:1.15mS/cm, Current: 0.63 amps. 2008/07/30 23:32:59 Re-Home: Setting motor to raise and reseting click counter. 2008/07/30 23:33:04 Re-Home: HIGH current error of 1.419 amps (1.400 A) on click 23(state 3)! 2008/07/30 23:33:04 Re-Home: Motor Off: 23 clicks/1000, SndDpth:-0.006m, buffer: 0, Cond:1.15mS/cm, Current: 1.42 amps. 2008/07/30 23:33:04 Re-Home: Raised 23 clicks. Variance of 16 clicks. 2008/07/30 23:33:05 Re-Home: Setting motor to lower and reseting click counter. 2008/07/30 23:33:06 Re-Home: Motor Off: 2 clicks/ 2, SndDpth:-0.006m, buffer: 0, Cond:1.15mS/cm, Current: 0.64 amps. 2008/07/30 23:33:06 Re-Home: Lowered 2 of 2 clicks to HOME position. Re-Home: COMPLETE. 2008/07/30 23:33:07 Motor idle current changed from 208 to 208.